Page 1:Sapphire Toxic HD 7970 GHz Edition: 6 GB At 1600 MHz
Page 2:Board, Cooler, And Power Supply
Page 3:Clock Rates And Lethal Boost Mode
Page 4:Clock Rates And Power Consumption: Full Load
Page 5:Clock Frequencies And Power Consumption: Gaming
Page 6:Temperatures And Fan Speed
Page 7:Noise Level Comparison Videos
Page 8:Building An Eyefinity-Capable System
Page 9:Setting Up And Benchmarking Eyefinity 6
Page 10:Setting Up And Benchmarking Eyefinity 4
Page 11:If You Like Sapphire's Vapor-X, Stick With The 3 GB Card
Noise Level Comparison Videos
The following videos demonstrate what the acoustic measurements on the previous page sound like in the real world. We’ve ordered them by fan speed and load.
At idle and with a room temperature of 22 degrees Celsius (72 degrees Fahrenheit), the fan speed is at 20 percent of its maximum, resulting in a nice 30.9 dB(A). That sounds fine, but you probably won't ever see it in practice since it can only be achieved without Lethal Boost and in a room with a fairly low temperature.
Idle: 30 Percent Fan Speed at 32.8 dB(A)
Thirty percent is more realistic. This is possible with Lethal Boost enabled, so long as you don't overclock manually. In that case, the Toxic HD 7970 GHz Edition goes all the way to 40 percent or so (and about 40.6 dB[A]) after 30 minutes.
Moderate Load: 50 Percent Fan Speed at 46.8 dB(A)
The fans run at a full 50 percent duty cycle under simple 3D applications like Google Earth with Lethal Boost enabled. Down-clocked to 1100 MHz, the fans only slow to 45 percent or so; they also operate above 50 percent (at 46.8–49.2 dB[A]) during Metro 2033 benchmarking.
Gaming Load with Lethal Boost: 65 – 67 Percent Fan Speed at 54.2 dB(A)
At a fixed 1201 MHz GPU clock rate and 65- to 67-percent fan speeds, we've finally caught up with the noise generated by AMD's reference design. Acoustics are now definitely a problem, more so because the aggressive fan profile isn't even really needed.
Full Load with Factory Settings: 73 Percent Fan Speed at 57.4 dB(A)
Bitmining takes the Toxic HD 7970 GHz Edition 6 GB’s noise from obnoxious to flagrant at a 73-percent duty cycle, which generates about 57.5 dB(A).
Full Load with Lethal Boost: 80 Percent Fan Speed at 60.5 dB(A)
Just when we thought that it couldn’t get any worse, Sapphire's Toxic HD 7970 GHz Edition passes the 60 dB(A) barrier under full load. On the bright side, the card's cooling performance is exceptional. Still, we're not sure a graphics card needs to run cooler overclocked than at its factory clock rates.
Lethal Boost mode's fan profile is too aggressive, and should be revised. The frequency spikes up and down are also counterproductive.
- Sapphire Toxic HD 7970 GHz Edition: 6 GB At 1600 MHz
- Board, Cooler, And Power Supply
- Clock Rates And Lethal Boost Mode
- Clock Rates And Power Consumption: Full Load
- Clock Frequencies And Power Consumption: Gaming
- Temperatures And Fan Speed
- Noise Level Comparison Videos
- Building An Eyefinity-Capable System
- Setting Up And Benchmarking Eyefinity 6
- Setting Up And Benchmarking Eyefinity 4
- If You Like Sapphire's Vapor-X, Stick With The 3 GB Card