Page 1:SilverStone ST85F-PT Power Supply Review
Page 2:Packaging, Contents, Exterior, And Cabling
Page 3:A Look Inside And Component Analysis
Page 4:Load Regulation, Hold-Up Time, And Inrush Current
Page 5:Efficiency, Temperature And Noise
Page 6:Protection Features, Evaluated
Page 7:Cross-Load Tests And Infrared Images
Page 8:Transient Response Tests
Page 9:Ripple Measurements
Page 10:Performance, Performance Per Dollar, Noise And Efficiency Ratings
Page 11:Pros, Cons And Final Verdict
SilverStone's Strider Platinum series offers compact dimensions along with Platinum efficiency and a fully modular cable design. The 850W member of this line will be evaluated today. Its strong card against the competition is the 471W power density score.
Previously, SilverStone's Strider Platinum family consisted of four members with capacities ranging from 550 to 850 W. However, two more units were recently added, rated for 1 kW and 1.2 kW. This makes the line more complete since it covers everything from mainstream to high-end PCs. The two higher-capacity models are larger than the others, measuring 18 cm deep, though their footprint is still reasonable.
SilverStone is one of the few companies that provides a power density, or watt per liter, score for each of its products. For the Strider Platinum family, the ST1200-PT achieves the highest score with its 517 W per liter rating. Second-place goes to the ST85F-PT (471 W per liter) thanks to its shallow depth of only 140 mm. We already reviewed the ST75F-PT, and now the time has come for us to look at the ST85F-PT. According to SilverStone, this is the world's smallest (physically), fully modular ATX PSU with 850 W capacity and 80 PLUS Platinum efficiency.
The ST85F-PT is based on a Sirfa/High Power platform. Rarely does SilverStone partner with an OEM other than Enhance Electronics, and we aren't huge fans of Sirfa's designs. Moreover, the OEM is mostly known for budget-oriented products.
Due to the power supply's compact size, the ST85F-PT uses a smaller 120 mm fan. Usually that translates into more noise due to the faster-spinning blades. Fortunately, in this case, the PSU is supported by a semi-passive mode that outputs zero noise under light loads.
This product's main features are 80 PLUS Platinum efficiency, a 40 ℃ temperature rating for continuous full-power delivery, the single +12V rail, a fully modular design, and the 120 mm FDB fan.
The ST85F-PT is stocked with every protection feature you could want. Only OCP is missing, and that's meaningless in an 850 W PSU with one +12V rail. Finally, SilverStone increased its warranty to five years, which is pretty long. Still, the warranty falls short of Corsair's and EVGA's 10-year coverage in this price segment. Given that this product has to fight with the EVGA G2/P2 models and Corsair RMx ones, we believe that SilverStone should make the warranty last at least seven years.
|Total Max. Power (W)||850|
The single +12V rail can deliver the PSU's full power alone, typical of every modern PSU that features DC-DC converters for generating the minor rails. Speaking of the minor rails, their output is strong enough to support an enthusiast-class system; the same applies to the 5VSB rail. As for the -12V rail, we don't really care about it. The newest ATX specification states that it's no longer required, so PSU manufacturers should get rid of it as soon as possible.
Cables And Connectors
|Description||Cable Count||Gauge||Connector Count (Total)|
|ATX connector 20+4 pin (560 mm)||1||18 AWG||1|
|4+4 pin EPS12V (750 mm)||1||18 AWG||1|
|4+4 pin EPS12V (550 mm)||1||18 AWG||1|
|6+2 pin PCIe (550 mm)||4||18 AWG||4|
|SATA (600 mm+150 mm+150 mm+150 mm)||3||18 AWG||12|
|Four-pin Molex (600 mm+150 mm+150 mm)||1||18 AWG||3|
|FDD Adapter (+100 mm)||1||22 AWG||1|
The number of PCIe connectors is low for a 850 W PSU, though at least there are two EPS connectors available at the same time. The ST75F-PT only has one EPS connector, so if you need two of them, the ST85F-PT is a better fit. Moreover, the ST85F-PT has 12 SATA connectors, four more than the 750 W model. Strangely enough, though, it only has three peripheral four-pin Molex connectors, while the lower-capacity model has six. We also noticed another major difference between the 750 W and 850 W Strider Platinum units: the former has two Berg connectors fixed on the native cables, while the latter has one provided through an adapter. Of course, we prefer the adapter since only a handful of users will actually use a floppy connector. SilverStone probably noticed this shortcoming in the ST750F-PT and decided to fix it for the ST85F-PT.
All of the cables consist of 18-gauge wires, which are recommended by the ATX spec.
Since this PSU features a single +12V rail, we do not have anything to say about its power distribution.
MORE: Best Power Supplies
MORE: Power Supplies 101
MORE: How We Test Power Supplies
MORE: Picking The Right Power Supply: What You Should Know
MORE: Computer History: From The Antikythera Mechanism To The Modern Era
MORE: All Power Supply Content
- SilverStone ST85F-PT Power Supply Review
- Packaging, Contents, Exterior, And Cabling
- A Look Inside And Component Analysis
- Load Regulation, Hold-Up Time, And Inrush Current
- Efficiency, Temperature And Noise
- Protection Features, Evaluated
- Cross-Load Tests And Infrared Images
- Transient Response Tests
- Ripple Measurements
- Performance, Performance Per Dollar, Noise And Efficiency Ratings
- Pros, Cons And Final Verdict