Page 1:Asus ROG Swift PG278Q G-Sync Monitor Review
Page 2:Gaming Features: G-Sync, Fast Refresh, ULMB and GamePlus
Page 3:Packaging, Physical Layout, And Accessories
Page 4:OSD Setup and Calibration of the PG278Q
Page 5:Measurement And Calibration Methodology: How We Test
Page 6:Results: Brightness and Contrast
Page 7:Results: Greyscale Tracking and Gamma Response
Page 8:Results: Colour Gamut and Performance
Page 9:Results: Viewing Angles and Uniformity
Page 10:Results: Pixel Response, Input Lag and Blur Reduction
Page 11:ROG Swift PG278Q, A Display Technology Revolution
OSD Setup and Calibration of the PG278Q
The ROG Swift is completely focused on gaming, and as such has a minimal OSD. Fortunately, there are just enough adjustments to dial in colour and greyscale properly. We also discovered a couple of other unique features.
The Colour menu has Brightness, Contrast, and Colour Temp controls. Even though the gamma measured fine in our press sample, a couple of presets to make the tone darker or lighter for specific games would be nice.
Colour Temp contains three fixed presets (Normal, Warm, Cool) and a User mode with RGB sliders. They start at their maximums, which is not ideal, but you won’t give up much contrast by calibrating them.
The Image menu has an OD (overdrive) option and the ULMB motion-blur reduction feature. We did all our tests on the OD Normal setting and saw no artifacts at all. ULMB, as already mentioned, improves motion resolution and reduces light output. To see just how much, check out our charts on page ten.
The final menu has language options, OSD position and timeout, signal info, and Light In Motion (a toggle for the red light that rings the monitor’s base). If you turn it on, the light stays lit even when the Swift is turned off. All Reset returns the menu settings to their factory defaults.
Since the PG278Q only has one picture mode, calibration is limited to setting the desired brightness level and choosing a colour temperature. The User preset unlocks the RGB sliders, which start at their maximum values. A few clicks to red and green gave us decent greyscale tracking. There are no gamma adjustments. But our tests showed solid results, so they’re not missed. We obtained our benchmark results with ULMB turned off. It’s a variable backlight strobe, so it reduces light output. Again, check out the complete tests on page ten.
|Asus ROG Swift PG278Q Calibration Settings|
|RGB||Red 94, Green 98, Blue 100|
- Asus ROG Swift PG278Q G-Sync Monitor Review
- Gaming Features: G-Sync, Fast Refresh, ULMB and GamePlus
- Packaging, Physical Layout, And Accessories
- OSD Setup and Calibration of the PG278Q
- Measurement And Calibration Methodology: How We Test
- Results: Brightness and Contrast
- Results: Greyscale Tracking and Gamma Response
- Results: Colour Gamut and Performance
- Results: Viewing Angles and Uniformity
- Results: Pixel Response, Input Lag and Blur Reduction
- ROG Swift PG278Q, A Display Technology Revolution