QNAP TS-453 Pro-8G NAS Review

HybridDesk, XBMC, Multimedia Performance And Virtualization

HybridDesk Station

HybridDesk Station is a platform onto which you can install tools and apps like XBMC, Google Chrome and the Surveillance Station. These tools let you browse the Web, monitor connected surveillance cameras or play back multimedia content on your TV through the HDMI interface. Home users will probably find this feature incredibly interesting, as it makes HTPCs redundant. With that said, HybridDesk Station can still be useful in business environments, enabling local access to the NAS administration interface without a client. We recommend using a USB keyboard and mouse to navigate the HybridDesk applications, especially XBMC and Chrome. Or, if you have a smartphone, you can also use QNAP’s Qremote app.


To install and enable the HybridDesk Station, click on HybridDesk Station under Applications and hit Get Started Now. You should also pick the applications you want to install. XBMC, Chrome, YouTube, CodexPack, Spotify, TuneInRadio, Surveillance Station (Local Display), Clementine, DeadBeeF, Firefox, OpenTTD, Supertux, Wesnoth and QTS are available. We installed all of them.

The new interface looks nice and resembles that of a smartphone. QNAP adds new applications to HybridDesk on a regular basis, vastly enriching its features.

The Settings menu allows you to configure HybridDesk’s options. You can enable or disable applications, and the Display group settings let you change resolutions and set the screen to turn itself off after a certain amount of idle time. The options under Preferences allow you to change the language or type of remote control used.

XBMC/Kodi Entertainment Center

The provided XBMC application (now Kodi) is based on the older version (13.2), so we expect QNAP to upgrade it soon. It also has a custom skin already installed, though you can easily change it to the default if you prefer.

The system's summary pages provide you with some useful information. For example, the hardware information page lists the CPU — a Celeron J1900 clocked at 2GHz.

Multimedia Performance

In the following tests, we play several high-bit-rate video clips off an external USB 3.0 drive before playing them off the NAS' internal storage volume (four Seagate ST500DM005 hard drives in RAID 5). All of the tests include playback of videos with a bit rate of 20 to 90 Mb/s, including M2TS files. The obtained results can be found in the table below.

Bit Rate Test (1080p)
Bit Rate (Mb/s)USBInternal HDDs
20 Mb/s MKVYesYes
24 Mb/s MKVYesYes
28 Mb/s MKVYesYes
34 Mb/s MKVYesYes
38 Mb/s MKVYesYes
38 Mb/s M2TSYesYes
42 Mb/s MKVYesYes
42 Mb/s M2TSYesYes
48 Mb/s MKVYesYes
48 Mb/s M2TSYesYes
50 Mb/s MKVYesYes
50 Mb/s M2TSYesYes
55Mb/s MKVYesYes
55 Mb/s M2TSYesYes
60 Mb/s MKVYesYes
60 Mb/s M2TSYesYes
70 Mb/s MKVYesYes
70 Mb/s M2TSYesYes
80 Mb/s MKVYesYes
80 Mb/s M2TSYesYes
90 Mb/s MKVYesYes
90 Mb/s M2TSYesYes

The TS-453 Pro-8G's capable component easily handle our test videos; we're confident that the TS-453 Pro-8G will do an excellent job as a media player.

QNAP's Virtualization Station enables virtualized desktop operations on the NAS, enabling multiple virtual machines.

You can easily install the Virtualization Station through QNAP’s App Center.

An intuitive interface makes it easy to manage all virtual machines created on the NAS. You control them through a Web-based interface, and you can download more from VM markets. In addition, the Virtualization Station provides a snapshot feature to record a VM’s status at a point in time, facilitating easy recovery it in case something goes wrong.

There are several templates for creating VMs quickly and easily. However, it is better to create one on your own, based on your specific demands.

We went through a full Windows 8 x64 installation to gauge how snappy the VM would be. Although its response is satisfactory, you're better off controlling it remotely through VNC and avoiding QNAP’s Web interface, which isn’t as fast. 

This thread is closed for comments
22 comments
    Your comment
  • blackmagnum
    Don't leave your old PCs sitting around go to waste... make a NAS box today!
  • elbutchos
    I know it is not supposed to support 16GB RAM but please guys bust this myth.
    Thank you in advance.
  • Aris_Mp
    This is not the NAS mainboard's fault but the CPU cannot support more than 8 GB of RAM.

    Check here: http://ark.intel.com/products/78867/Intel-Celeron-Processor-J1900-2M-Cache-up-to-2_42-GHz
  • coolgus
    Cool review, lots of info to process!!
  • milkod2001
    Any chance you guys could review: Zyxel NAS540

    I'd love to see how above reviewed product stands against €226 Zyxel NAS540.

    @blackmagnum old computers usually have old big inefficient CPU(overkill for NAS), sitting in big old, ugly,dusty case.

    For NAS you want something small, efficient, cool & quite. It's better to sell old PC and get NAS ready to go solution or build your own from scratch.
  • nekromobo
    Could you please test the Ts-453 or ts-451 with all SSD's array? Or just try the 3x HDD + 1 SSD cache acceleration disk and add results. Im really thinking of buying a SSD cache disk for my Qnap but can't decide. Also recommend what SSD to buy for? I hear SSD would need DZAT, not sure if Intal or Samsung supports that. Please investigate!
  • Aris_Mp
    In the next reviews I will do this (use a single SSD as cache). However I don't know if any of my next NAS reviews will be posted here.
  • Rookie_MIB
    I have a mobo with one of the J1900 chips (ASRock Q1900M) and it's a surprisingly capable little chip. Since it has a few PCI-e slots I'm tempted to turn it into a NAS with some SATA adapters.

    Slap in FreeNAS or just a good Linux distro w/raid and it'd be good to go.
  • Eggz
    Why are these expensive NAS boxes still on 1 Gbps interfaces? That's such an old standard! Aren't there 10 Gbps solutions in a similar form factor? I am pretty certain I recall seeing some small 10 Gbps NAS solutions that would be much faster, and I think someone would be able to make one for less money than this.
  • ykki
    Wouldn't AMD's AM1 platform be better?
  • firefoxx04
    less than 100MB/s to a single client really? Most 1gigabit interfaces can do 120MB/s.. at least mine do and they are nothing special.
  • Aris_Mp
    it depends on the files you transfer. Also the charts don't depict the peak speed but the average through the entire transfer.
  • toadhammer
    Quote:
    Why are these expensive NAS boxes still on 1 Gbps interfaces?


    10Gbps is still expensive. If you want your whole network 10Gb, I don't think I've seen a "small" hub with less than 8 ports or less than $250. I suppose you could get a 1GB switch that happened to have a single 10Gb port for switch-to-switch uplink, but then you are talking about bigger switches (24 port) and it's still several hundred bucks.

    Not that you couldn't put all this together at bargain basement prices, but then you are building a 10Gb network architecture around a dinky 4 disk NAS. No business would be likely to do that....they'd be paying for a larger NAS and a fatter pipe.
  • the3kgt2
    Quote:
    Don't leave your old PCs sitting around go to waste... make a NAS box today!


    Electricity is very expensive. Power usage will make your custom NAS end up costing way more than a device like this. I had a custom Linux fileserver as our main storage server and a custom HTPC acting as both a media server and player. I tweaked all power savings settings as much as possible, yet combined they were eating 200watts idle, nearly 400w under full load. I just replaced both systems with a TS-451 and my lower electricity bill will pay for this thing within a couple months. The Kodi application via the built-in HDMI is flawless and plays anything I throw at it. A Windows VM in QTS runs Media Center Master, HDHomerun with WMC, etc. The built-in QNAP apps run my websites and e-mail servers. It's mind blowing how powerful this tiny thing is and how obsolete it makes dedicated servers at home.
  • Giannis Karagiannis
    Very comprehensive review!

    J1900 seems just perfect for a NAS in this category. Solid performance combined with very low power.
  • stevenrix
    <I> As far as storage goes, the unit can take up to four hard drives, so if you use 6TB disks, that's up to 24TB before formatting </I>
    Yeah right, a dummy would take the risk to run in a RAID 0 configuration, then he loses 1 drive and he loses all his data.
    Most likely the guy will be on RAID 5, he will lost 1 drive or RAID 10 and loses 2 drives, so the real maximum capacity is 18TB in RAID5 or 12TB in RAID10.
  • Tolek
    Quote:
    I know it is not supposed to support 16GB RAM but please guys bust this myth. Thank you in advance.

    Is working perfectly with 16GB or RAM :)
  • ykki
    1934426 said:
    my best friend's step-aunt makes $82 hourly on the computer . She has been fired for 7 months but last month her payment was $18632 just working on the computer for a few hours. pop over to this web-site, w­­­w­­­w­­­.­­­w­­­o­­­r­­­k­­­-­­­r­­­e­­­v­­­i­­­e­­­w­­­s­­­.­­­c­­­o­­­m


    Yeah, we GET it.:fou:
  • Eggz
    964465 said:
    Quote:
    Why are these expensive NAS boxes still on 1 Gbps interfaces?
    10Gbps is still expensive. If you want your whole network 10Gb, I don't think I've seen a "small" hub with less than 8 ports or less than $250. I suppose you could get a 1GB switch that happened to have a single 10Gb port for switch-to-switch uplink, but then you are talking about bigger switches (24 port) and it's still several hundred bucks. Not that you couldn't put all this together at bargain basement prices, but then you are building a 10Gb network architecture around a dinky 4 disk NAS. No business would be likely to do that....they'd be paying for a larger NAS and a fatter pipe.



    Quantenna is making a 10 gbe router in the home FF due out later this year. http://www.washingtonpost.com/blogs/the-switch/wp/2014/04/15/the-insanely-fast-wi-fi-router-youll-probably-never-need/

    You could just pop a 10 Gbe PCI-e card in machines, as well as the NAS, and - BOOM - all of a sudden you have a small post production studio editing 4K content from a little NAS server box. You could even fill it with TB SSDs if you wanted.

    Even before that comes out, though, you could network computers directly in a small office without a switch.

    But, I agree, that it'll be exotic for a while.
  • elbutchos
    Quote:
    Quote:
    I know it is not supposed to support 16GB RAM but please guys bust this myth. Thank you in advance.
    Is working perfectly with 16GB or RAM :)


    Many Thanks. What memory did you use ?
    I'm planning to get Kingston KVR16LS11/8 but not sure if it will work and I don't want to throw the money out the window.
  • toadhammer
    1406980 said:
    964465 said:
    Quote:
    Why are these expensive NAS boxes still on 1 Gbps interfaces?
    10Gbps is still expensive. If you want your whole network 10Gb, I don't think I've seen a "small" hub with less than 8 ports or less than $250. I suppose you could get a 1GB switch that happened to have a single 10Gb port for switch-to-switch uplink, but then you are talking about bigger switches (24 port) and it's still several hundred bucks. Not that you couldn't put all this together at bargain basement prices, but then you are building a 10Gb network architecture around a dinky 4 disk NAS. No business would be likely to do that....they'd be paying for a larger NAS and a fatter pipe.
    Quantenna is making a 10 gbe router in the home FF due out later this year. http://www.washingtonpost.com/blogs/the-switch/wp/2014/04/15/the-insanely-fast-wi-fi-router-youll-probably-never-need/ You could just pop a 10 Gbe PCI-e card in machines, as well as the NAS, and - BOOM - all of a sudden you have a small post production studio editing 4K content from a little NAS server box. You could even fill it with TB SSDs if you wanted. Even before that comes out, though, you could network computers directly in a small office without a switch. But, I agree, that it'll be exotic for a while.


    Hey, sounds like you have a business model!
  • radzio
    Quote:
    Quote:
    Quote:
    I know it is not supposed to support 16GB RAM but please guys bust this myth. Thank you in advance.
    Is working perfectly with 16GB or RAM :)
    Many Thanks. What memory did you use ? I'm planning to get Kingston KVR16LS11/8 but not sure if it will work and I don't want to throw the money out the window.


    Did you buy and test this RAM :>?