QNAP TS-453 Pro-8G NAS Review

Quick Configuration

QNAP has an online quick-start guide that will help you quickly and easily set up the NAS. We will follow the steps of this guide below.

First, you have to install the HDDs and make all of the necessary cable connections. Then you switch on the NAS. Once you do that, you'll be asked to type "start.qnap.com" in your favorite browser and enter the cloud key found in the quick-installation guide and on the sticker that resides on the top of the NAS. If you don’t have an Internet connection or if you lost your cloud key, you can select the local installation option through QNAP's Qfinder application. First you'll have to download the app though; there is no software disc provided in the bundle.

Once you enter the cloud key, you're asked to register the NAS by creating a myQNAPcloud account.

After you complete the myQNAPcloud settings, you're ready to start the installation process. At first, you're asked if the NAS is intended for home or business use. According to what you select, the relevant applications are installed. For example, the multimedia-oriented apps are chosen if you select "home use". Otherwise, only the essential utilities are installed. Probably the most important step here is the RAID level selection for your installed HDDs.

Once the installation finishes, you get a page providing you with three options: Connect and log in to QTS, check your email for the myQNAPcloud activation mail or get more utilities for your NAS. We chose the last option to show you all the utilities QNAP provides for its NAS servers before proceeding to the QTS login page.

QNAP offers seven utilities that help you get the most out of your NAS server. We will take a look at them later on in this review.

After the configuration finishes, you're able to access the administration interface's log-in page.

This thread is closed for comments
22 comments
    Your comment
  • blackmagnum
    Don't leave your old PCs sitting around go to waste... make a NAS box today!
  • elbutchos
    I know it is not supposed to support 16GB RAM but please guys bust this myth.
    Thank you in advance.
  • Aris_Mp
    This is not the NAS mainboard's fault but the CPU cannot support more than 8 GB of RAM.

    Check here: http://ark.intel.com/products/78867/Intel-Celeron-Processor-J1900-2M-Cache-up-to-2_42-GHz
  • coolgus
    Cool review, lots of info to process!!
  • milkod2001
    Any chance you guys could review: Zyxel NAS540

    I'd love to see how above reviewed product stands against €226 Zyxel NAS540.

    @blackmagnum old computers usually have old big inefficient CPU(overkill for NAS), sitting in big old, ugly,dusty case.

    For NAS you want something small, efficient, cool & quite. It's better to sell old PC and get NAS ready to go solution or build your own from scratch.
  • nekromobo
    Could you please test the Ts-453 or ts-451 with all SSD's array? Or just try the 3x HDD + 1 SSD cache acceleration disk and add results. Im really thinking of buying a SSD cache disk for my Qnap but can't decide. Also recommend what SSD to buy for? I hear SSD would need DZAT, not sure if Intal or Samsung supports that. Please investigate!
  • Aris_Mp
    In the next reviews I will do this (use a single SSD as cache). However I don't know if any of my next NAS reviews will be posted here.
  • Rookie_MIB
    I have a mobo with one of the J1900 chips (ASRock Q1900M) and it's a surprisingly capable little chip. Since it has a few PCI-e slots I'm tempted to turn it into a NAS with some SATA adapters.

    Slap in FreeNAS or just a good Linux distro w/raid and it'd be good to go.
  • Eggz
    Why are these expensive NAS boxes still on 1 Gbps interfaces? That's such an old standard! Aren't there 10 Gbps solutions in a similar form factor? I am pretty certain I recall seeing some small 10 Gbps NAS solutions that would be much faster, and I think someone would be able to make one for less money than this.
  • ykki
    Wouldn't AMD's AM1 platform be better?
  • firefoxx04
    less than 100MB/s to a single client really? Most 1gigabit interfaces can do 120MB/s.. at least mine do and they are nothing special.
  • Aris_Mp
    it depends on the files you transfer. Also the charts don't depict the peak speed but the average through the entire transfer.
  • toadhammer
    Quote:
    Why are these expensive NAS boxes still on 1 Gbps interfaces?


    10Gbps is still expensive. If you want your whole network 10Gb, I don't think I've seen a "small" hub with less than 8 ports or less than $250. I suppose you could get a 1GB switch that happened to have a single 10Gb port for switch-to-switch uplink, but then you are talking about bigger switches (24 port) and it's still several hundred bucks.

    Not that you couldn't put all this together at bargain basement prices, but then you are building a 10Gb network architecture around a dinky 4 disk NAS. No business would be likely to do that....they'd be paying for a larger NAS and a fatter pipe.
  • the3kgt2
    Quote:
    Don't leave your old PCs sitting around go to waste... make a NAS box today!


    Electricity is very expensive. Power usage will make your custom NAS end up costing way more than a device like this. I had a custom Linux fileserver as our main storage server and a custom HTPC acting as both a media server and player. I tweaked all power savings settings as much as possible, yet combined they were eating 200watts idle, nearly 400w under full load. I just replaced both systems with a TS-451 and my lower electricity bill will pay for this thing within a couple months. The Kodi application via the built-in HDMI is flawless and plays anything I throw at it. A Windows VM in QTS runs Media Center Master, HDHomerun with WMC, etc. The built-in QNAP apps run my websites and e-mail servers. It's mind blowing how powerful this tiny thing is and how obsolete it makes dedicated servers at home.
  • Giannis Karagiannis
    Very comprehensive review!

    J1900 seems just perfect for a NAS in this category. Solid performance combined with very low power.
  • stevenrix
    <I> As far as storage goes, the unit can take up to four hard drives, so if you use 6TB disks, that's up to 24TB before formatting </I>
    Yeah right, a dummy would take the risk to run in a RAID 0 configuration, then he loses 1 drive and he loses all his data.
    Most likely the guy will be on RAID 5, he will lost 1 drive or RAID 10 and loses 2 drives, so the real maximum capacity is 18TB in RAID5 or 12TB in RAID10.
  • Tolek
    Quote:
    I know it is not supposed to support 16GB RAM but please guys bust this myth. Thank you in advance.

    Is working perfectly with 16GB or RAM :)
  • ykki
    1934426 said:
    my best friend's step-aunt makes $82 hourly on the computer . She has been fired for 7 months but last month her payment was $18632 just working on the computer for a few hours. pop over to this web-site, w­­­w­­­w­­­.­­­w­­­o­­­r­­­k­­­-­­­r­­­e­­­v­­­i­­­e­­­w­­­s­­­.­­­c­­­o­­­m


    Yeah, we GET it.:fou:
  • Eggz
    964465 said:
    Quote:
    Why are these expensive NAS boxes still on 1 Gbps interfaces?
    10Gbps is still expensive. If you want your whole network 10Gb, I don't think I've seen a "small" hub with less than 8 ports or less than $250. I suppose you could get a 1GB switch that happened to have a single 10Gb port for switch-to-switch uplink, but then you are talking about bigger switches (24 port) and it's still several hundred bucks. Not that you couldn't put all this together at bargain basement prices, but then you are building a 10Gb network architecture around a dinky 4 disk NAS. No business would be likely to do that....they'd be paying for a larger NAS and a fatter pipe.



    Quantenna is making a 10 gbe router in the home FF due out later this year. http://www.washingtonpost.com/blogs/the-switch/wp/2014/04/15/the-insanely-fast-wi-fi-router-youll-probably-never-need/

    You could just pop a 10 Gbe PCI-e card in machines, as well as the NAS, and - BOOM - all of a sudden you have a small post production studio editing 4K content from a little NAS server box. You could even fill it with TB SSDs if you wanted.

    Even before that comes out, though, you could network computers directly in a small office without a switch.

    But, I agree, that it'll be exotic for a while.
  • elbutchos
    Quote:
    Quote:
    I know it is not supposed to support 16GB RAM but please guys bust this myth. Thank you in advance.
    Is working perfectly with 16GB or RAM :)


    Many Thanks. What memory did you use ?
    I'm planning to get Kingston KVR16LS11/8 but not sure if it will work and I don't want to throw the money out the window.
  • toadhammer
    1406980 said:
    964465 said:
    Quote:
    Why are these expensive NAS boxes still on 1 Gbps interfaces?
    10Gbps is still expensive. If you want your whole network 10Gb, I don't think I've seen a "small" hub with less than 8 ports or less than $250. I suppose you could get a 1GB switch that happened to have a single 10Gb port for switch-to-switch uplink, but then you are talking about bigger switches (24 port) and it's still several hundred bucks. Not that you couldn't put all this together at bargain basement prices, but then you are building a 10Gb network architecture around a dinky 4 disk NAS. No business would be likely to do that....they'd be paying for a larger NAS and a fatter pipe.
    Quantenna is making a 10 gbe router in the home FF due out later this year. http://www.washingtonpost.com/blogs/the-switch/wp/2014/04/15/the-insanely-fast-wi-fi-router-youll-probably-never-need/ You could just pop a 10 Gbe PCI-e card in machines, as well as the NAS, and - BOOM - all of a sudden you have a small post production studio editing 4K content from a little NAS server box. You could even fill it with TB SSDs if you wanted. Even before that comes out, though, you could network computers directly in a small office without a switch. But, I agree, that it'll be exotic for a while.


    Hey, sounds like you have a business model!
  • radzio
    Quote:
    Quote:
    Quote:
    I know it is not supposed to support 16GB RAM but please guys bust this myth. Thank you in advance.
    Is working perfectly with 16GB or RAM :)
    Many Thanks. What memory did you use ? I'm planning to get Kingston KVR16LS11/8 but not sure if it will work and I don't want to throw the money out the window.


    Did you buy and test this RAM :>?