Phanteks leans pretty hard on the Enthoo name for case branding, and the Evolv name invokes a style that the company has spread across the spectrum from Mini ITX to full ATX. Phanteks even lists EATX capability for its Evolv ATX, though actual motherboard depth is limited to 10.4". The case would need another 0.3" to make it fit the plethora of 10.6" to 10.7" extreme-enthusiast motherboards that have been misnamed EATX by their manufacturers, but rest assured your standard ATX board fits. And now for something to get excited about!
Tempered glass adds a little show without making the case look gaudy, which is why it was used so often in furniture 30 years ago. It's harder than normal glass, more impact resistant, and those unfortunate enough to break it will find a bunch of glass pebbles rather than shards and splinters. Moreover, it does a far better job of containing noise than plastic side panels, while also being flatter and more scratch-resistant. Phanteks chooses a medium tint to help camouflage your uglier internal components while complimenting your external peripherals.
A pop-up door reveals two USB 3.0 ports, headphone and microphone jacks, and a control button for the case's RGB LED controller. Phanteks uses 3mm-thick aluminum for its face and top panels, and the front edge of the top panel reveals that it's a custom extrusion rather than a mechanically formed sheet.
Both side panels are in fact glass, so you'd better be willing to put some time into cable routing if you want to show your finished work to friends. Eight screw slots allow the rear fan to slide up and down to accommodate top or bottom fitting orientation of single-fan radiators of either 120mm or 140mm spacing.
A short dust filter slides under the bottom edge of the rear panel to cover the power supply's air inlet. The front intake filter is hidden behind the front panel, but let's take a look at a few dimensions before tearing into this thing.
One of the greatest features of the Enthoo Evolv ATX Tempered Glass isn't actually a feature, but the price. The MSRP is currently only $10 higher than the standard non-glass windowed version. Conversely, the biggest deficit in the Enthoo Evolv ATX is its inclusion of only seven expansion slots. Several three-way (and all four-way) SLI boards need an eighth slot for the bottom graphics card, and many need 0.2" to 0.3" more motherboard mounting space than the 10.4" provided. While compatible with most enthusiast-oriented hardware, the Enthoo Evolv ATX's combination of "not quite there" dimensions excludes a broad swath of ultra-high-end configurations.
Peeling away the Enthoo Evolv ATX face panel, we find a snap-in filter that's large enough to cover two 140mm or three 120mm fans. Behind it is a partial shroud covering the show-side of a power supply, and the front of that shroud hosts four mounting points for an optional additional SSD tray.
The power supply slides in from the right side, which would be the non-windowed side of the standard version of this case. The Tempered Glass side panel of this version reveals all those hidden wires, along with the two SSD trays on the back of the motherboard tray, plus the two 3.5" drive trays that would otherwise hide behind the power supply shroud.