Performance Guide: Intel Celeron

Celeron Vs. Pentium III, Continued

The following table shows the differences between the Pentium III Coppermine and the Celeron.

  Celeron Pentium III
Socket Socket 370 Socket 370 or Slot-1
System Bus Speeds 66 MHz 100 MHz, 133 MHz
Processor Speeds 366, 400, 433, 466, 500, 533, 566, 600, 633, 667 MHz 500, 533, 550, 600, 650, 667, 700, 733, 750, 800, 850, 866, 933, 1000 MHz
L2 Cache Size 128 kBytes 256 kBytes
L2 Cache Speed Full CPU clock speed Full CPU clock speed
L2 Cache Bus Width 256 Bits 256 Bits
Operating Voltage 2.0V (366-533 MHz)
1.5V (533A-600 MHz)
L2 Cacheable Area 4 GBytes 64 GBytes
L2 Associativity 4-way set 8-way set
Scalability Uniprocessor systems Dual-Processor systems
Price of slowest model $70 for 366 MHz $175 for 500 MHz
Price of top model $130 for 600 MHz $795 for 933 MHz

As you can see in this table, the practical differences can be reduced to the following:

The Pentium III as well as the Celeron 533A and up use the same core The Pentium III runs at 100 or 133 MHz system speed, while all Celerons are officially restricted to 66 MHz only . As the multipliers have only been defined up to x8.0, smaller multipliers had to be 'recycled':
x4.5 will work as x8.5 (Pentium III 850, Celeron 566)
x5.0 will work as x9.0 (Celeron 600)
x5.5 will work as x9.5 (Celeron 633)
x6.0 will work as x10.0 (Celeron 667) The Celeron is equipped with only 128 kByte L2 Cache All new Celeron CPUs require 1.5V core voltage, while Pentium III models run at 1.60 or 1.65V (1.70V in case of the 933 and 1000 MHz version).

What both FC-PGA processors have in common is that they are very fragile. First, the plastic package makes the whole CPU lightweight. Second, the die is now exposed directly at the top of the processor. Thanks to this flip-chip technique, the heat sink will have direct contact to the die without the formerly used heat plate. This byproduct of high clock speeds is of course extremely important with respect to proper cooling.

Upgrading from the old to a new Celeron may be an interesting issue as well. In theory, every new Celeron should work in most Socket 370 motherboards. But as many motherboard companies did not implement low voltage support (down to 1.5V), lots of older boards can only be equipped with the Celeron 533 max (requiring 2.0V). The CPU multiplier cannot be changed for some years now, so the only two issues for upgrading are, first, the availability of a new BIOS, supporting the new Celeron and second, the support of 1.5 V core voltage . Information on both should be available at the website of your motherboard manufacturer.


Naturally, Intel wants to address both the performance and the low end market. In order to reduce system costs, customers with low performance demands are suggested to combine the Celeron processor with an i810 motherboard. The i810 chipset comes with all features required by a standard business computer: Intel's fancy hub architecture, Integrated 2D/3D graphics, UltraDMA/66 IDE interface, AC97 sound system, two USB ports and support for 66, 100 (i810) and 133 MHz FSB (i810E).

As you can imagine, the integrated graphics controller is both a benefit and a big handicap. On the one hand, you basically do not need a graphics card any more, as the chipset takes over all graphics functions. In addition, the graphics logic of the chipset is able to make use of the main memory. This solution is very inexpensive indeed. However, we can only recommend i810 for computers that will never be used for demanding graphic applications or 3D games! As you will see later, the performance of Intel's integrated graphics really beggars belief.

Test Configuration

Test System
CPU Intel Celeron, Intel Pentium III
Motherboard Asus CUBX, Intel 440BX chipset
Asus CUWE-RM, Intel i810 chipset
RAM 128 MB PC133 SDRAM, 7ns (Wichmann Workx or Memory Solution ) CL2
Hard Disk Seagate Barracuda ATA ST320430A
20 GBytes, 7200 rpm
Graphics Card Asus V6600, nVIDIA GeForce 256
32 MByte SDRAM
nVIDIA Drivers 5.08 for Windows 98

nVIDIA TNT2/Ultra Reference Card
32 MByte SDRAM
nVIDIA Drivers 5.08 for Windows 98

Intel i810 Integrated Graphics
Driver Version 4.1

Operating System Windows 98 SE 4.10.2222 A
Benchmarks and Setup
Office Applications Benchmark BAPCo SYSmark2000
OpenGL Game Benchmark Quake III Arena
Retail Version
command line = +set cd_nocd 1 +set s_initsound 0
Graphics detail set to 'Normal', 640x480x16
Benchmark using 'Q3DEMO1'
Direct3D Game Benchmark Expendable
Downloadable Demo Version
command line = -timedemo
Screen Resolution 1024x768x85, 16 Bit
DirectX Version 7.0
Create a new thread in the UK Article comments forum about this subject
This thread is closed for comments
No comments yet
Comment from the forums
    Your comment