Page 1:NEC EA274WMi: A High-Performance 27" Monitor
Page 2:Packaging, Physical Layout, And Accessories
Page 3:OSD Setup And Calibration Of The NEC EA274WMi
Page 4:Measurement And Calibration Methodology: How We Test
Page 5:Results: Brightness And Contrast
Page 6:Results: Greyscale Tracking And Gamma Response
Page 7:Results: Colour Gamut And Performance
Page 8:Results: Viewing Angles And Uniformity
Page 9:Results: Pixel Response And Input Lag
Page 10:NEC EA274WMi: Some Unique Features
Results: Colour Gamut And Performance
Colour gamut is measured using a saturation sweep that samples the six main colours (red, green, blue, cyan, magenta, and yellow) at five saturation levels (20, 40, 60, 80, and 100%). This provides the most realistic view of colour accuracy possible.
First, we’ll show you the sRGB preset. This is still the EA274WMi’s Standard picture mode. sRGB has no adjustments available except Brightness and Contrast.
The most telling chart of the three is the CIE triangle. The primary colours are pretty close, although blue falls outside the gamut. And the cyan and magenta secondaries are outside of their targets because you can’t adjust greyscale in sRGB mode. If you read Display Calibration 201: The Science Behind Tuning Your Monitor, then you know accurate greyscale tracking is essential to lining up the secondary colours properly. Without the ability to adjust them, you’re stuck with the above gamut. Fortunately, the luminance values are almost perfect. You can see that NEC purposely lowered the brightness of blue in order to compensate for its oversaturated result at 100 percent.
Calibrating the EA274WMi in its Colour Temp 3 mode produces far better numbers.
Blue is still over-saturated, but now the secondary colours are right where they should be. We only had to tweak the RGB sliders to achieve excellent colour performance. The blue luminance at 100-percent saturation is still low, but that’s OK. Now the image looks perfectly accurate and natural as it should.
Returning to the comparison group...
An average error of 1.45 Delta E is very low, as we'd expect from a monitor selling for £550. This display is certainly worthy of a professional’s toolkit, as long as you don’t need the wider Adobe RGB colour gamut. We’ll talk about that below.
Gamut Volume: Adobe RGB 1998 And sRGB
There are basically two categories of displays in use today: those that conform to the sRGB/Rec. 709 standard like HDTVs, and wide-gamut panels that show as much as 100 percent of the Adobe RGB 1998 spec. We use Gamutvision to calculate the gamut volume, based on an ICC profile created from our actual measurements. Although we recently tested a couple of screens that offer both gamuts, NEC's EA274WMi maxes out at sRGB.
sRGB is the gamut used for gaming and video content, and a majority of productivity applications. The NEC matches that volume almost perfectly. If you look at the CIE chart again, you’d think the volume is a little greater than 100 percent sRGB. But Gamutvision takes luminance into account as well. Blue, magenta, and to a slight extent red are a little low, which brings the overall percentage just under 100. Pros requiring an sRGB monitor would do well to consider this one.
- NEC EA274WMi: A High-Performance 27" Monitor
- Packaging, Physical Layout, And Accessories
- OSD Setup And Calibration Of The NEC EA274WMi
- Measurement And Calibration Methodology: How We Test
- Results: Brightness And Contrast
- Results: Greyscale Tracking And Gamma Response
- Results: Colour Gamut And Performance
- Results: Viewing Angles And Uniformity
- Results: Pixel Response And Input Lag
- NEC EA274WMi: Some Unique Features