EVGA SuperNOVA 650 P2 PSU Review

Ripple Measurements

To learn how we measure ripple, please click here.

The following table includes the ripple levels we measured on the EVGA SuperNOVA 650 P2's rails. The limits, according to the ATX specification, are 120mV (+12V) and 50mV (5V, 3.3V and 5VSB).

Test12V5V3.3V5VSBPass/Fail
10% Load3.9mV4.8mV7.0mV4.8mVPass
20% Load4.9mV4.9mV7.9mV4.7mVPass
30% Load5.5mV4.8mV7.7mV4.8mVPass
40% Load5.7mV5.0mV10.5mV4.6mVPass
50% Load6.1mV5.8mV9.7mV4.6mVPass
60% Load6.5mV6.3mV9.9mV4.7mVPass
70% Load6.8mV6.6mV10.7mV5.2mVPass
80% Load6.7mV6.7mV11.0mV5.7mVPass
90% Load7.3mV7.1mV12.2mV6.5mVPass
100% Load7.7mV8.4mV12.5mV7.2mVPass
110% Load8.0mV8.2mV13.5mV7.4mVPass
Cross-Load 15.7mV6.4mV11.1mV9.3mVPass
Cross-Load 27.1mV8.0mV13.5mV6.9mVPass

Super Flower's Leadex platforms simply do not have issues with high ripple, and the 650 P2 demonstrates its quality with the results listed above. Even in a worst-case scenario, the ripple at +12V was only 8mV. And only the 3.3V rail went above 10mV.

Ripple Oscilloscope Screenshots

The following oscilloscope screenshots illustrate the AC ripple and noise registered on the main rails (+12V, 5V, 3.3V and 5VSB). The bigger the fluctuations on the screen, the bigger the ripple/noise. We set 0.01V/Div (each vertical division/box equals 0.01V) as the standard for all measurements.

Ripple At Full Load

Ripple At 110-Percent Load

Ripple At Cross-Load 1

Ripple At Cross-Load 2

This thread is closed for comments
14 comments
    Your comment
  • cst1992
    $120 is a good price for a Platinum 650W PSU. That used to be the price for Gold units with half the warranty a couple of years ago.
  • TbsToy
    Your reviews are so jaded. Anything for the ad dollars, right? Not going to go all the way here but as an example but why didn't you compare the Antec EA 650 Platinum power supply for a more fair apples to apples test instead of the Bronze 80 one? Yeah, I, know why. You guys just keep going down hill.

    Walt Prill
  • Aris_Mp
    Before you dive into conspiracy theories etc. can you tell me where you saw the bronze Antec unit? Last time I checked the Antec Edge 650 which is included in the comparison has Gold efficiency. Also I can only include PSUs which I tested with this setup and the EA 650 Platinum isn't among them. And even if it was it wouldn't do better than the EDGE 650 since it uses a budget, ACRF platform which offers average load regulation and ripple suppression.

    And a piece of advice, better have your facts straight before you jump into conclusions.

    Merry Christmas to all!
  • cst1992
    @Aris_Mp I think he's talking about the EA-650 Bronze on the first page of the review. The EA-650 Platinum is also on Newegg, and it's actually cheaper than the EVGA by $6.

    http://www.newegg.com/Product/Product.aspx?Item=9SIA24G28N5004&cm_re=antec_ea_650-_-17-371-056-_-Product

    Now that I think about it, none of the products on the first page are similar in price to this one while being Platinum, and the CoolerMaster is actually the wrong wattage. Why is that? The products should be similar in price, at least.
  • Aris_Mp
    I have no control on the product prices shown on the first page. This is an automated script that looks on all PSUs mentioned in the review and depicts their prices. Also since I don't have so many PSU reviews with 115V input, I have to include into my comparison charts, at least in some cases, PSUs that have slightly different capacity and features than the one under test. Once I have a capable PSU database this won't be a problem any more.

    Also including a product in a pricing list is another thing with including it into a comparison chart. In any case I advice all of you not to lose the forest for the tree(s) and read the entire review before you draw any conclusions or make purchase decisions. Finally, in a PSU review the final rating is based on facts and numbers so the final rating is easily supported.
  • PureBlackFire
    nice review.
  • Take_Out
    I have been in electronic/electrical power distribution field since 1964 (old fogie, used slide rules {slip sticks} to study field effect transistors, heh) working/studying/troubleshooting in a large assortment of types and uses of devices for military and industrial and residential.

    In gaming computer type PSU builders (not brandnames put on them), I like Super Flower, Seasonic, Antec and used to like PC Power and Cooling before the takeover, donno now. Forgot some I am sure. Use the performance list here to make PSU decisions in a fair manner.

    I build gaming computers for family and friends and they kick ass for the cost and last a long time usually unless a part fails. 8800GT and 560ti video cards I liked. Now like GTX 970s and 960s for my money level. 750 and 750tis and some others nearby are only Direct X12 cards in 7 series lineup, go look it up in Wikipedia, despite deceptive advertising on Newegg that all 7 series cards are Direct X12 compatible, not like them. Must be nubies there for the holidays.

    HATE changing OS just cause engineers need something to do, darn it. I know I simplify it, but it is THERE that they make you spend money and worse, learn their "NEW" way to make it work, how utterly fantastic for them. I think engineers are behind a lot of viruses so they can fix some of them, although there are bad actors for sure out there with extremists.

    I think buying a well known brand (Lenovo, Dell, ASUS, etc) of regular NEW i5 4590 plain model cpu or so computer (absolutely NOT small form factor or s or t on end, ugh, regular-sized ATX board mid tower with 8 or 16GB of RAM, and a 1TB HrdDrve WD or Seagate included in price of about 500USD, then add a 240 or 500GB SSD recommended by Tom's, for OS and top games you play to load a lot faster by a wide margin, really. Steam takes up a LOT of room. Then put a good Nvidia GTX-970 or 960 into it and game away with a darn warrenty. Plus engineers have something to do with making all the parts work together, is quite a job........ really. People who make money depend on those types of puters to feed thier kids, they have to work right, not just having fun with them.

    Really like Intel cpus and Nvidia 900 series video cards right now, dem magic, was a time I liked 3DFX(VooDoo2)SLI and ATI(RAGE) cards, even AMD cpus a decade or so back with the X2 64bit Athlons that buried Intel for a while.

    TUROK Dinosaur Hunter is coming back, OMGosh. Game hooked me on 3D gaming for real.

    EVGA seems to be broadening their approach to vending PSUs. Might prove interesting.
    Usually the companies that have stayed in business for many decades are doing something right and it tells. EVGA hasn't yet, but seems to be trying hard, I like their brand of video cards and they support them well.

    seriously something wrong with me, I could keep going and going, sorry....

    Merry Christmas.
  • f-14
    [No message]
  • f-14
    too expensive a good PSU should cost $10 per 100w on average nd at the cheapest be the price of the amps on the +12v rail so in this PSU's case average price $65 and sale priced at $54.
  • TomaszC
    I have a question regarding Fan RPM, Delta Temperature And Output Noise for load range 300W-400W - does the fan RPM changes smootchly in temperature/load function, or just switch from 0RPM to 800RPM?
  • Aris_Mp
    2201108 said:
    I have a question regarding Fan RPM, Delta Temperature And Output Noise for load range 300W-400W - does the fan RPM changes smootchly in temperature/load function, or just switch from 0RPM to 800RPM?


    no smooth transition. It goes straight away to 600 RPM.
  • TomaszC
    Thank you Aris_Mp
    Does the same algorithm applicable for Corsair RM750i ?
    I'm going to buy one them.
  • Aris_Mp
    nope, the RM750i has a smoother transition.
  • Sam_201
    What about the other parts of the hold up time tests ? Power ok and the other part that you cover in your new reviews ? Did it pass those ?