Page 1:Features & Specifications
Page 2:Packaging, Contents, Exterior & Cabling
Page 3:Teardown & Component Analysis
Page 4:Load Regulation, Hold-Up Time & Inrush Current
Page 5:Efficiency, Temperature & Noise
Page 6:Protection Features
Page 7:Cross-Load Tests & Infrared Images
Page 8:Transient Response Tests
Page 9:Ripple Measurements
Page 10:Performance, Value, Noise & Efficiency
Page 11:Final Analysis
Cross-Load Tests & Infrared Images
Our cross-load tests are described in detail here.
To generate the following charts, we set our loaders to auto mode through our custom-made software before trying more than 25,000 possible load combinations with the +12V, 5V and 3.3V rails. The load regulation deviations in each of the charts below were calculated by taking the nominal values of the rails (12V, 5V and 3.3V) as point zero. The ambient temperature was between at 30°C (86°F) to 32°C (89.6°F).
Load Regulation Charts
For the most part, we observe efficiency levels between 85-90%. If your system draws less than 180W under normal conditions, you're better off investing in a higher-efficiency PSU. Otherwise, if you anticipate high utilization most of the time, and you cannot spend more on a PSU, the 750 B3 will fare well enough.
Unfortunately, our sample died during OPP testing, so we didn't have the chance to shoot any infrared images with our FLIR camera.
MORE: Best Power Supplies
MORE: All Power Supply Content
- Features & Specifications
- Packaging, Contents, Exterior & Cabling
- Teardown & Component Analysis
- Load Regulation, Hold-Up Time & Inrush Current
- Efficiency, Temperature & Noise
- Protection Features
- Cross-Load Tests & Infrared Images
- Transient Response Tests
- Ripple Measurements
- Performance, Value, Noise & Efficiency
- Final Analysis