ECS Battles With A New Z270 Lightsaber

ECS announced that it has three new motherboards coming based on Intel’s 200-series chipsets.

ECS plans to initially use two motherboards targeted at gamers to handle the Z270 market. The Z270-Lightsaber is the more potent of the two boards, featuring a 14-phase power design and support for up to three graphics cards in a multi-GPU configuration. It also supports a Killer E2500 gigabit NIC, and it has a U.2 port.

The Z270H4-I isn’t quite as feature rich as the Z270-Lightsaber, but it’s a mini-ITX board and is thus targeted at a slightly different market. It does come with two gigabit NICs and a Wi-Fi card to give you an ample array of internet connection options.

ECS installed Realtek ALC1150 audio codecs on both of its Z270 boards, and it also incorporated its LEET Superior Audio software technology to further enhance the auditory performance. The company also said that both of these boards can support DDR4 RAM clocked up to 3,200MHz.

To compete in the micro-ATX form factor market, ECS announced the B250H4-M8/M8S. This board offers a more modest feature set, and it supports RAM up to 2,133MHz. The company didn’t tell us much about this board, though.

The Z270 boards are expected to be released on January 5. We do not have release information for the B250H4-M8/M8S, nor do we have pricing information for the other boards at this time.

ECS 200-Series Motherboards

Model/Spec

Z270-Lightsaber (a.k.a. Z270H4-A)

Z270H4-I

B250H4-M8/M8S

Form Factor

ATX

Mini-ITX

Micro-ATX

Memory Support

4 x DDR4 DIMMs Up To 3,200MHz

2 x DDR4 DIMMs Up To 3,200MHz

2 x DDR4 DIMMs Up To 2,133 MHz

Power Phases

14

6

N/A

PCI/PCI-E

-5 x PCI-E x1

-3 x PCI-E x 16

PCI-E x16

-PCI

-2 x PCI-E x1

-PCI-E x16

Networking

Killer E2500 Gigabit LAN

-Intel WGI 219V Gigabit LAN

-Realtek 8118A

-Gigabit LAN

Realtek RTL8111GN Gigabit Controller

Audio

-Realtek ALC 1150

-LEET Superior Audio II

-Realtek ALC 1150

-LEET Superior Audio

Realtek ALC892

Ports

-6 x SATA-III

-M.2 Key M

-U.2

-USB Type-C

-4 x SATA-III

-M.2 Key M

-M.2 Key E

-USB Type-C

-SATA

-M.2 Key M

This thread is closed for comments
6 comments
    Your comment
  • BugariaM
    Wow, I can not believe my eyes.

    I do not see tons of ridiculous plastic "shield", no strings of LEDs everywhere, and even VRM heatsinks look exactly as they should look like

    My respect for the company ECS
  • thundervore
    2393205 said:
    Wow, I can not believe my eyes. I do not see tons of ridiculous plastic "shield", no strings of LEDs everywhere, and even VRM heatsinks look exactly as they should look like My respect for the company ECS



    That's because they are still playing catchup. Give them time, there will be IO shields and RGB once they see their boards didn't sell as good as the competition.
  • joex444
    ECS has been junk since the 90s when they were Elitegroup. Pass.