ECS Durathon 2 A320AM4-M3 Motherboard Review


UEFI – That's an Eyeful

We were not expecting to see such a colorful display inside of the ECS M3 UEFI. The Main page is a lot to digest right out of the gate, but it does contain useful information for general system health. The leftmost circle indicates operating modes that ECS preconfigures for various use cases for its product.

By default, the system comes up in Normal mode, which appears to favor a balance of performance, power consumption, and noise. “Disable” places the priority to performance and power, at the cost of sound. In the center of the screen, CPU Tctl is listed, as well as the default monitored system temperature. To the right, voltages for the CPU, DIMM, and 12V rails are listed, and available fan headers are printed out underneath the purple fan icon. At the time of our testing, the 7/12/17 UEFI was the latest; ECS has since released a newer one, and a beta BIOS with support for the AMD Raven Ridge APUs has also been made available.

Clicking into Advanced (top right) abandons the rainbow-clad icons and graphics in favor of the more traditional BIOS feel with a subtle 3D cube grid background from before. The main menu here is very barren, with a helpful text block to the top right and available options listed on the bottom right. As we prepared for testing, confirming our boot setup is straightforward as far as UEFIs go, we found the ECS driver provided fairly standard options for PXE and boot-device configurations, as well as priorities for storage locations.

As this is an A320 board, we weren’t expecting much from the M.I.B. X menu, and sure enough, no options for core overclocking are available. We are blessed with the option to bump up the frequency of our RAM, though, and DDR4-2400 is achievable for our standard test benchmarks. However, voltage controls are not accessible, nor XMP profiles, so bumping up higher than DDR4-2400 was outside of our immediate control. On the flip side, DDR4 rates are available from DDR4-666 to DDR4-3200. So solder up those external voltage supplies and go for it!

The chipset menu is another area that is lightly populated, and only the South Bridge menu provides any configurations to the user. Advanced menus do have some room to grow, with our first foray into the options with PC Health status. Smart Fan Control behaves similarly to other vendors’ solutions where PWM fans can be calibrated and placed into operating modes to fit different use cases. Various Zen options are available to the builder, like on other vendors' boards out there, and another stab at memory options is available to tighten up timings within the JEDEC spec.

Overall, the UEFI is serviceable, if not enjoyable, from our perspective. As convenient as the Main UEFI is, it would have helped to tone down the colors and pick a blue or silver theme throughout the interface. Even tying in the purple from the box would have been a better choice. Another nitpick would be to just remove the blank UEFI menus and add breadcrumbs throughout to at least drive users back to where they were. Opening up voltage controls on the DIMMs would have been an excellent addition, as would getting extra DRAM speed into the mix.

MORE: Best Motherboards

MORE: How To Choose A Motherboard

MORE: All Motherboard Content

Create a new thread in the UK Article comments forum about this subject
This thread is closed for comments
No comments yet
Comment from the forums
    Your comment