Drevo Ares NVMe SSD Review

256GB NVMe SSD Performance Testing

Comparison Products


The Drevo Ares 256GB falls into the low-cost NVMe arena with a price point very close to the Intel 600p, MyDigitalSSD BPX, and Patriot Hellfire M.2. This is a small but growing product segment. We expect explosive growth by early 2018 as Phison E8 and SMI SM2263 products come to market.

The 256GB NVMe class isn't a hot topic for enthusiasts. Most of us look for NVMe SSDs in 512GB or larger capacities. Samsung didn't even release a 256GB 960 Pro, but it did use the Polaris controller in the OEM SM961 SSD we tested last year. The Samsung 950 Pro, provided you can still find one, delivers the lowest latency in this capacity. The Intel 600p is readily available and is the least expensive NVMe SSD on the market. If price is your primary concern, the MyDigitalSSD BPX is widely considered the most well-rounded product in 256GB and 512GB capacities.

Sequential Read Performance

To read about our storage tests in-depth, please check out How We Test HDDs And SSDs. We cover four-corner testing on page six of our How We Test guide.

Drevo says the Ares 256GB will deliver up to 1,400 MB/s of sequential read throughput, but we nearly hit 2,000 MB/s at a queue depth (QD) of 8. The drive features the same controller as the Intel 600p, and both suffer from low QD1 performance. The two drives deliver similar performance up to QD4, but the Ares jumps ahead of the Intel when we intensify the workload.

Sequential Write Performance

It's difficult to hit the rated 600 MB/s of sequential write speed. We do attain the hero number, but only for a brief time. Our test shows the average over an extended period of time, so the brief SLC cache boost only helps a little.

We have the same issue with the Intel 600p. Surprisingly, the Ares with 3D MLC flash comes up short of the Intel 600p and its slower 3D TLC NAND.

Sustained Sequential Write Performance

This test writes 128KB sequential data across the entire usable LBA range. The Ares 256GB can actually write up to 680 MB/s, but the drop off to native TLC speed happens once you fill the drive to roughly 25%. Then performance drops to around 220 MB/s. This transition occurs because the SLC buffer shrinks according to how much data you store on the drive.

Random Read Performance

The Ares and 600p share nearly identical low-QD random read performance, but the Drevo's MLC flash scales better as we ramp up the workload. This is the one aspect that we don't like about the Drevo Ares. High-performance SATA SSDs deliver up to 10,000 random read IOPS at QD1. That's the mark we use to separate the best consumer SSDs from mainstream products, and we naturally expect NVMe SSDs to reach that benchmark.

Random Write Performance

Cache technology has made random write performance much less of a concern. Early SSDs had stuttering issues due to high random write latency. SSD vendors quickly learned how to correct the issues. Since then, random write performance has become a gloss-over specification for consumer use.

80% Mixed Sequential Workload

We describe our mixed workload testing in detail here and describe our steady state tests here.

Mixed random performance is a hot topic because your operating system rarely just reads or writes data serially. Instead, the operating system attempts to issue simultaneous read and write commands. The SATA interface doesn't allow you to read and write data at the same time, but the NVMe protocol does. That's one of the reasons why NVMe SSDs feel so much faster than SATA during real-world use.

The Drevo Ares 256GB slots in the middle of the group during our 80% mixed sequential workload. It delivers outstanding mixed workload performance compared to SATA.

80% Mixed Random Workload

The drive also performs well compared to the Intel 600p in mixed random workloads. With just a $20 difference in pricing, you should take a very close look at the Ares if you already have the 600p on your wish list.

Sequential Steady-State

Even though it clearly looks the part, Drevo didn’t design the Ares for steady-state workloads. The dual-core controller paired with 384Gbit TLC flash can't keep pace with the premium NVMe SSDs. However, the low-cost NVMe drives do run a little faster than most SATA SSDs in steady state, particularly in the key mixtures, such as 80% (desktop) and 70% (workstation).

Random Steady-State

The random steady-state test shows how the SM2260's cache system sacrifices consistency for high burst performance. A large rush of data will fill the SLC buffer, but then the SSD has to flush the buffered data to the TLC pool. That slows down the incoming data, again.

SLC caching works great as long as you don't need to transfer more data at one time than the SLC buffer can absorb. The Ares features a dynamic SLC buffer capacity. We aren't sure how much data can fit into the buffer because its capacity changes based on the amount of data stored on the drive.

PCMark 8 Real-World Software Performance

For details on our real-world software performance testing, please click here.

The Drevo Ares 256GB consistently outperforms the Intel 600p's service time, but it falls behind the other NVMe SSDs. The 900p and the Ares are the two least expensive drives in our lineup, so we don't mind the lower performance.

Application Storage Bandwidth

It's rare to see a product outperform another in the service time tests but then trail in the throughput results. Both the 600p and Ares provide similar performance, but there is a latency difference between the two. The Ares can finish the task faster than the 600p, but oddly enough, the 600p returns to an idle state quicker.

PCMark 8 Advanced Workload Performance

To learn how we test advanced workload performance, please click here.

The recovery test doesn't look good for the Drevo Ares because it needs more time to recover than the test allows. The dual-core processor was never very good for background tasks to start with, but the 256Gbit 3D flash introduces another set of issues. These two factors can amplify latency during severe workloads.

Total Service Time

The service time results show the MLC-based Ares with the same high result as the two TLC-based products. The TLC-powered Intel 600p and Samsung 960 EVO recover within the five minute idle time during the recovery phases of the test, but the Ares doesn't fare as well. Drevo could address this issue with a firmware update.

Disk Busy Time

The disk busy time test shows us more of the same. The Ares was not built to tackle heavy workloads, and it doesn't handle adversity well.


MORE: How We Test HDDs And SSDs

MORE: All SSD Content

Create a new thread in the UK Article comments forum about this subject
This thread is closed for comments
No comments yet
Comment from the forums
    Your comment