Taichi And A Fatal1ty: Asrock Fights Back With X99 Motherboards

Asrock showed off two new X99 motherboards at Computex that are designed to be both feature-rich and (relatively) budget-friendly. These two boards, the Asrock Fatal1ty X99 Professional Gaming i7 and the Asrock X99 Taichi, are rather similar in features and price, but they differ on a few minor points, including aesthetics.

Both boards use a 12-phase power design and have a water pump header onboard. For storage, Asrock placed just one M.2 Key M slot on each board, along with ten SATA-III (6 Gbps) ports. There is a second M.2 slot on both boards, but it is a Key E slot, which prevents it from working with essentially all M.2 SSDs. As M.2 SSDs are becoming more common and are also dropping in price, most users would like to have a second M.2 Key M slot on the board, but it shouldn’t be a serious problem for most users.

The motherboards have identical PCI-E connectivity options, as well. There are three PCI-E x16 slots reinforced with steel plating, and two PCI-E x1 ports. Asrock opted to install two Intel gigabit NICs on each board alongside an 802.11ac Wi-Fi chip.

The motherboards mostly differ from each other on aesthetics (as we mentioned), as well as on UEFI BIOS, audio and USB. The more expensive of the two boards, the Asrock Fatal1ty X99 Professional Gaming i7, uses a fairly simple color scheme that is black with a few white and red highlights.

The Taichi, however, has several images of gears printed on the PCB, and the BIOS battery is placed in the center of the biggest one so that it looks like part of the gear. This board is mostly black as well, but it has considerably more white color on the heatsinks and PCB. The Taichi also has a new UEFI BIOS skin to match its theme.

There is only a minor discrepancy between the two boards in terms of USB support. Both boards have a USB 3.1 Gen 2 controller from Asmedia that powers a Type-C and a Type-A port. Where the boards differ here is that the Taichi has just five USB 3.0 ports and seven USB 2.0, but the Fataly1ty motherboard has eight USB 3.0 ports.

Asrock opted to use Creative SoundBlaster Cinema3 audio hardware on the X99 Fatal1ty Professional Gaming i7 motherboard, but opted for a Realtek audio codec for the Taichi.

Asrock plans to launch both motherboards in early July.

Asrock X99 Motherboards At Computex
MotherboardFatal1ty X99 Professional Gaming i7X99 Taichi
Memory8 x DDR48 x DDR4
PCI-E3 x Steel Plated PCI-E 3.0 x16
2 x PCI-E 2.0 x1
M.2 Key E (For Wi-Fi)
3 x Steel Plated PCI-E 3.0 x16
2 x PCI-E 2.0 x1
M.2 Key E (For Wi-Fi)
 Storage10 x SATA-III
M.2 Key M
M.2 Key M
AudioCreative SoundBlaster Cinema3Realtek + Purity Sound 3
Networking2 x Intel Gigabit LAN
2 x Intel Gigabit LAN
USBUSB 3.1 Gen 2 Type-A (Asmedia Controller)
USB 3.1 Gen 2 Type-C (Asmedia Controller)
8 x USB 3.0 Type-A
6 x USB 2.0 Type-A
USB 3.1 Gen 2 Type-A (Asmedia Controller)
USB 3.1 Gen 2 Type-C (Asmedia Controller)
5 x USB 3.0 Type-A
7 x USB 2.0 Type-A

Follow Michael Justin Allen Sexton @EmperorSunLaoFollow us on FacebookGoogle+RSSTwitter and YouTube.

This thread is closed for comments
    Your comment
  • logainofhades
    Finally someone, other than MSI, bringing out the black and white color schemes.
  • IInuyasha74
    I am too honestly. Too much black motherboards nowadays. Now MSI, Asus and Asrock is getting into it.

    Personally I always wished there would be a wider range of PCB colors used in motherboards, but it hasn't really happened.
  • BulkZerker
    I miss DFIs mobos and their obnoxious UV reactive color schemes.