Page 1:Introducing the AMD Radeon RX 580 8GB
Page 2:Power Supply and Cooling
Page 3:Ashes, Battlefield 1, Civilization VI, and Doom
Page 4:GTA V, Hitman, Metro, and Rise of the Tomb Raider
Page 5:Ghost Recon, The Division, and The Witcher 3
Page 6:Power Consumption
Page 7:Temperatures and GPU Frequencies
Page 8:Fan Speed and Noise
Power Consumption Overview
Our exploration of power consumption begins with a look at the loads while running different tasks. After all, this is where AMD made the most headway with Radeon RX 580.
Specifically, power consumption is way down with multiple monitors attached, so long as you're running them all at the same resolution. Moreover, power use drops while watching video using hardware acceleration. An aggressively-overclocked card like Sapphire's Nitro+ Radeon RX 580 Limited Edition set to its O/C mode really shows off the effect of these lower GPU and memory clock rates.
Of course, it'd be great to see AMD roll these enhancements out to older Polaris-based cards via firmware update, but it sounds like the company has no plans to do this.
At 1411 MHz in silent mode and 1450 MHz in boost mode, you're talking about much higher clock rates than Ellesmere was originally set to run at. Impressively, Sapphire enables these frequencies without using more power than the Radeon RX 480. In our gaming loop, its Nitro+ Radeon RX 580 operates at an almost-constant 1450 MHz, whereas the previous-gen card was limited to 1350 MHz and used just as much power. One explanation for this is lower leakage current. A much better cooling solution helps keep GPU temperatures down, and we estimate this provides an advantage of ~10W.
The Radeon RX 580's higher frequency does come at a price, though: it requires a higher voltage setting.
Sapphire's Nitro+ Radeon RX 480 averages 1.15V and peaks at 1.1563V. Those numbers increase to an average of 1.1688V and a peak of 1.19V for the company's Nitro+ Radeon RX 580 Limited Edition, creating more power loss. This doesn't show up in the graph, though, because of the RX 480 card's much higher leakage current.
A Closer Look at Silent Mode
The Nitro+ Radeon RX 580 Limited Edition ships with a silent mode clock rate of 1411 MHz, which matches the boost mode setting of Sapphire's non-Limited Edition model. As a result, our results should apply to that card as well.
First, we present power consumption during our gaming loop:
The rails are balanced fairly well, though there are some brief peaks that exceed the motherboard slot’s maximum rating of 5.5A.
During our stress test, all of the numbers go up (some of them significantly). Now the motherboard slot consistently nudges up to the PCI-SIG specification's limits.
Illustrating the motherboard slot’s results with a bar graph shows just how close to the limit Sapphire gets with its Nitro+ Radeon RX 580 Limited Edition. The peaks aren’t particularly meaningful since they're brief; it's the constant loads you want to focus on. Those stay well within a safe range.
A Closer Look at Boost Mode
Switching over to boost mode pushes the Nitro+ Radeon RX 580 Limited Edition to a GPU clock rate of 1450 MHz. That's a big step up from the vanilla version's ceiling, but it should still represent what you might see after some manual overclocking. With this in mind, let’s take a look at power consumption during our gaming loop:
The rails are still balanced fairly well, even though we observe short peaks that exceed the motherboard slot’s maximum rating of 5.5A once again.
Again, our results increase significantly during the stress test, with the motherboard slot’s power consumption hovering around the PCI-SIG specification's limit.
The motherboard slot’s load doesn't increase, since the GPU is driven by the auxiliary power connectors. However, our numbers with manually overclocked memory, which is supplied by the PCIe slot, show Sapphire toeing the line.
Power Savings with Chill
AMD is making a big deal of its Chill technology with Radeon RX 580. This isn't new, though. Check out Benchmarking AMD Radeon Chill: Pumping The Brakes On Wasted Power from last December if you want more information.
Comparing To GeForce GTX 1060, 1070, and 1080
For a point of comparison to Radeon RX 580, check out the following power consumption measurements from several GeForce GTX 1060s. They fall well below Sapphire's overclocked board.
Why is it necessary to throw this information in as a post-script. Well, we think it's pretty important to mention that Sapphire's Nitro+ Radeon RX 580 Limited Edition uses as much power as overclocked third-party GeForce GTX 1080s in our gaming loop:
The Radeon RX 580 shows us that when finesse isn't in the cards, brute force works, too. Dialing in a higher core voltage (and enduring its higher power losses) are the price you pay for a few extra megahertz of GPU clock rate. The improvements to get excited about are found elsewhere: AMD's Radeon RX 580 demonstrates lower power consumption in multi-monitor configurations and hardware-accelerated video playback thanks to a new memory clock state.
MORE: Best Graphics Cards
MORE: All Graphics Content