Gigabyte began teasing its user-configurable UEFI even before the Z87 launch, but hasn't yet produced a firmware-specific video walk-through like Asus' to show off the changes. Z87X-UD3H does allow screenshots though, so I grabbed this one to show its default start page:
All of the basic overclocking controls are accessible from the default home page, and a button at the bottom of that page allows users to add items from other menus and subtract items from the default menu. Users who prefer large fonts can also use the Resolution Toggle key (F7) to expand the center settings menu to full screen.

Unwilling to settle for basic controls, we jumped straight to the Performance menu and toggled in for a tighter screen shot. The Frequency menu provides base clock and multiplier controls for the CPU core, integrated graphics, and DRAM. XMP mode is supported here, as well as from the DRAM menu. We reached 4.7 GHz at 1.3 V and 4.6 GHz at 1.25 V.
Gigabyte still uses the term “Uncore Ratio” for portions of the CPU that ASRock/Asus now call “Cache Ratio” and Biostar calls “Ring Bus Frequency”. Because this ratio affects many of the same items formerly referred to as the uncore, I’m satisfied with Gigabyte’s response.

Because memory clock and XMP mode can both be set from the frequency menu, the DRAM menu is really only needed to access timings. Switching from Auto to Quick timing mode allows both channels to be set simultaneously.
Primary, secondary, and tertiary timings are individually switchable between automatic and manual configuration. After selecting XMP Profile 1, the Z87X-UD3H set our DDR3-3000 to its rated timings at DDR3-2933. We weren’t able to bump it any higher at its rated voltage.
Gigabyte still spreads voltage settings across an unwieldy number of menus, with a main Voltage menu that serves no other function than to link submenus.
Remember that we just said we couldn’t overclock past DDR3-2933 at the memory’s rated voltage? The Z87X-UD3H covertly adds 20 mV, so its 1.630 V setting provided an actual 1.65 V.
- Affordable Z87 Express Motherboards: Not Quite "Back To Basics"
- ASRock Z87 Extreme4
- Z87 Extreme4 Firmware
- Z87 Extreme4 Software
- Asus Z87-Plus
- Z87-Plus Firmware
- Z87-Plus Software
- Biostar Hi-Fi Z87X 3D
- Hi-Fi Z87X 3D Firmware
- Hi-Fi Z87X 3D Software
- Gigabyte Z87X-UD3H
- Z87X-UD3H Firmware
- Z87X-UD3H Software
- MSI Z87-G45 Gaming
- Z87-G45 Gaming Firmware
- Z87-G45 Gaming Software
- Test Settings And Benchmarks
- Results: 3DMark And PCMark
- Results: SiSoftware Sandra
- Results: Audio And Video Encoding
- Results: Adobe Creative Suite
- Results: Productivity
- Results: File Compression
- Power, Heat, And Efficiency
- Overclocking
- When Picking A Winner Is Almost Impossible












Despite of 6 connectors i had trouble to connect only 4 3-pin case fans because only 2 connectors can control fan speed. 3rd connector has 4 constant levels. Another 2 are PWM connectors and there is no option in UEFI to make them control 3-pin fans. Last connector can supply 12V only.
So i used Y cable to control 2 identical fans, and set constant speed on hdd cage.