Memory Modules
07:00 - Wednesday 2 June 2004 by Patrick Schmid
Source: Tom's Hardware – Keywords: thg, puts, 13, bleeding
Source: Tom's Hardware – Keywords: thg, puts, 13, bleeding
Table of content:
Memory Modules
Ad

Clearly visible in this close-up: the small chip is an SPD Flash ROM (serial presence detect), which normally contains the timing information of a memory module.
First, a word about the memory modules used in the test. They were mainly from the big well-known brands, not all of which are always available in some regions of the world. However, availability issues aside, our goal was to procure a large number of representative samples for the purpose of our tests.
Vendors mostly sent us memory modules that could also handle clock rates exceeding 200 MHz (DDR400). However, this was irrelevant in the case of this test, as all the candidates worked within the normal parameters.
Centon Electronics 1AKPC400 - DDR500
Corsair Micro CMX512-3200LL - DDR400
Crucial Technology PC3200U-3031-A1 - DDR400
The DIMMs from Crucial are the only 512 MB modules we received that have eight 512 MBit chips on each side. Unfortunately, only a CAS latency of 3 clock rates is supported - this should be quicker.
- Previous page More Than 500 Tests For 13 Memory...
- Next page GeIL GL1GB 4400DC Ultra Platinum -...
Ad
Google Ads
Ad
The External Storage Articles and reviews
- Safer Stick: Biometric Flash Disk
- Go External: FireWire 800
- Samsung PC3700
- Gigabyte GN-WLBZ201
- Backup Master: Western Digital Media Center
- A Sturdy Companion: Olixir Mobile Data Vault 3DX
- PQI I-Stick
- Ups and Downs: Memory Timings Put to the Test
- OCZ Attempts to Step Up the Clock Pace with DDR400 Module
- Mobile and Attractive: External Hard Disks from Maxtor and Seagate
News
Reviews
Related Content


