Cables And Connectors

Ad

The user has an easy time of setup: plug in the cables you need, and store everything else in the cardboard box to keep the case nice and tidy.

The selection of cables is huge, including:

2 lines with two 5.25" connectors one line with two 5.25" connectors and a floppy-drive connector 2 lines with one 5.25" connector each one AUX power cable one cable with P4 plug one ATX main power connector one adapter for a 5-25" connector to two SATA connectors

Plug in what you need: the X-Connect cables
Performance

While the unit delivers the required power, the 3.3 V rail drops to 2.95 V at max load - far too much of a drop compared with the specified limit of 3.14 V. Even at half load, the 3.17 V readout of the 3.3V rail nearly approaches the tolerance limit. All other voltages fell within tolerance limits in our test.

Plain to see: all important specs are included on the model sticker

The 74% efficiency we measured under half load is respectable, and 70% efficiency at maximum load is also acceptable, but 61% efficiency at low load is decidedly too low. In that case too much cold, hard cash is vaporized as thermal loss - a fault the manufacturer absolutely has to remedy.

You'll have to fork out $100 in stores for this unit. While that may not be a bargain, it could represent a good deal for case modders.


  • Print
  • Send to a friend
  • Comment
  • Content also available in:
Ad
Talkback
Google Ads
Ad
The Cooling Articles and reviews
News
Reviews
Forum
See all Topics
Related Content
Videos