SCSI Representative: Maxtor Atlas 10K.4, Up Close And Personal
SCSI Representative: Maxtor Atlas 10K.4, Up Close And Personal

We didn't want to compare the Raptor with just any old SCSI model, but were aiming to set the measuring rod as high as possible from the outset. For this reason, we opted to use the Atlas 10K.4, even if we had to omit an individual test of this drive at this stage. Despite the fact that we received the top-of-the-range model with 147 GB, the performance is the same as that of the two sister models with 36 and 73 GB, respectively.
Even from the type designation it is possible to discern that the Maxtor hard drive is a fourth-generation model. This drive family originates from former rival Quantum, who got swallowed up by Maxtor in 2001.

The view of the underside of the Atlas 10K.4 is almost like looking at the surface of the Death Star from Star Wars. Particularly when compared with IDE hard drives, the boards of SCSI drives are mostly equipped with far more components. Seen in the foreground are the pins for setting microjumpers.
- Previous page Practical Comparison: Serial ATA And...
- Next page Technical Data: Western Digital Raptor
- Decision at 250 GB: Maxtor MaXLine Plus II vs. Western Digital...
- Maxtor Goes Serial ATA: The DiamondMax Plus 9 Gets Put to the Test
- Serial ATA Controller Untamed: The Silicon Image 3112
- Premium Controllers Under Scrutiny: Ultra160 RAID Adapters from...
- Serial ATA in Mini Format: 2.5" Disk Drive from Fujitsu
- The Next Generation: IBM DeskStar 180GXP with up to 180GB
- Fast and Secure: A Comparison of Eight RAID Controllers
- Western Digital Breaks a Record: WD2000JB with 200 GB
- Surprise From An Outsider: Samsung SV1204H With 120 GB
- Fujitsu's Silent Strike: The MAM3184MP With Ultra160 and 15,000 rpm