
We explored response times in our 22" LCD round-up, and the results here continue to reflect what we already know. TN-based monitors continue to offer the best response times. IPS technology is improving, but the U2412M's e-IPS panel doesn't seem to be an improvement over the H-IPS and p-IPS panels in our 27" LCD story.
But those numbers don't give us all of the information we need because response times don't really reflect an aspect of real-world performance. That's why it's far more interesting to look at input lag.
Benchmarking lag with a camera is the fastest way to measure performance. Of course, normal cameras can't cut it, since they shoot at frame rates that are far, far too low for investigating split-second differences. Going the stopwatch route is no better, due to human-introduced errors. That's why we're using a 1000 FPS high-speed camera to measure the time between clicking the mouse and getting a muzzle flash in Call of Duty: Modern Warfare 2. Since one frame is equal to one millisecond, it’s possible to measure timing with a high degree of accuracy.
Granted, there are issues with this approach. When you disable vertical sync in a game, the game engine renders at a rate different from that of the LCD. That doesn't change the refresh rate inherent to a monitor, though. Most LCDs, including the ones we're testing today, refresh at 60 Hz, which means that there can be up to a 34 ms variance between benchmark trials on the same screen. The problem is that there's no way to ensure that two LCDs are operating on the same refresh cycle. It's possible that the frame with a muzzle flash might get kicked over to the next refresh for one monitor, whereas it doesn't on another. That's why we take the average of five input lag measurements.
Note that our scores are a little different from those presented in our 27" IPS LCD round-up because we standardized to a specific level and scene in Call of Duty: Modern Warfare 2.

This isn't a pure input lag test in the traditional sense. It's essentially the responsiveness you see in a gaming environment; it includes the time for the computer to process your movement. However, that idea of "total input lag" is what's really important, as it ultimately affects your reaction time. According to research published by Clemson University, the average college student has a reaction time of 200 milliseconds to visual stimuli. But, if you're a truly competitive gamer, you'll likely end up under 100 ms. What's your reaction time? Test yourself.
Compared to our previous 27" round-up, it's not a surprise to see lower response times from the smaller 24" LCDs, since response time and input lag usually decreases with screen size. Why? Monitors with larger screens have higher pixel density, and as the number of pixels per inch (PPI) increases there are more pixels to refresh. Therefore, at 60 Hz, larger panels take longer to complete a complete screen refresh.
Of course, there are other factors that complicate performance in the real world. That's evident when we look at the low input lag from Dell's new U2412M. Normally, you'd expect to see TN-based displays like the S242HL bid outperform an IPS-based offering. But e-IPS is a slightly different beast. Unlike H-IPS and p-IPS, you don't get many of the filtering technologies that enable low delta E values. There is an upside to that loss, though: reduced input lag, which is why the U2412M performs better than many TN-based displays.
Which One Is Best?
Suffice it to say, our first 24" round-up leaves us with the distinct impression that e-IPS is a game-changer for anyone shopping for better quality at a lower cost. That is, better in the context of TN-based displays. e-IPS still isn't worthy of the "wide gamut" tag given to monitors based on p-IPS or H-IPS technology. However, compared to TNs, you do get better colour quality, wider viewing angles, improved luminosity, and a contrast ratio that's close to the advertised specs.
For many people, the price premium associated with IPS continues to be a turn-off. The "economical" moniker behind e-IPS isn't really deserved when you compare it against cheaper displays based on TN technology. However, that's changing. Monitors based on e-IPS haven't been around that long, and panel production is only now picking up.
The U2412M sells for £270 While the U2412M continues to cost more than non-IPS displays of similar size, it offers much better performance, which is why it's receiving our Tom's Hardware Approved award, given to a select few products that deserve recognition for their performance in our lab. We're still hoping Dell makes e-IPS more affordable with future price drops, though, which would make this a much more palatable purchase.
What monitors do you want to see us review next? Tell us below in the comments section!
- Three 24" LCDs, Benchmarked And Reviewed
- Acer S242HL bid
- Dell UltraSharp U2412M
- Samsung SyncMaster T24A550/T24A350
- Display Profile And Tilt
- Our Benchmarking Approach
- Out-Of-Box Performance: Brightness And Contrast Ratio
- Out-Of-Box Performance: Colour Accuracy And Gamut
- Out-Of-Box Performance: Maximum And Minimum Brightness
- Calibrated Performance: Brightness And Contrast Ratio
- Calibrated Performance: Colour Accuracy And Gamut
- Black And White Uniformity, Viewing Angles
- Power Consumption
- Response Time, Input Lag, And Final Words


16x10 is a much more useable monitor than 16x9 aspect ratios. Why are we going to 16x9? Is it because TVs want to be the same aspect ratio as movie screens? Is it because a 24" monitor has less pixels in 16x9 than 16x10 or 4x3 and therefore it's cheaper to build? I don't watch movies on my monitor. I watch them on my TV or at the theatre. That's where 16x9 may be more important to me. On the monitor I want USEABLE space... please.
Can you find some and report back?
are they better value and do they offer better quality image?
With so many major manufacturers selling larger 27" monitors now, usually tn, maybe its time to compare the newer ones again based on overall quality of image, which is for most people more important than just refresh rates in general usageI think?
Finding these is like trying to find rocking horse ****