Figure 6: "Two hop" WDS Bridge w/ Repeating To mix things up a little bit, my choice for the third AP in this example is the ASUS WL330 [reviewed here Device SSID MAC address IP address Belkin F5D7130 belkin54g_1 00 30 BD 91 BB FA 192.168.3.250 ASUS WL300g WL300g 00 0C 6E 34 9A AE 192.168.3.230 ASUS WL330 WL330 00 0E A6 22 A2 14 192.168.3.225 Table 2: Two hop AP Info summary Figure 7 again shows the Bridge setup screen for what is now the middle WDS AP, this time with an additional MAC addr... Figure 7: ASUS WL300g Wireless Bridge setup - two hops Figure 8 shows the Wireless Distribution System screen for the WL330 (which is strangely located in the Access Control section). Figure 9: Throughput comparison - Base AP and two hops (click on the image for a full-sized view) The 1.8Mbps average throughput that I got when associated with the WL330 at the end of the WDS chain (bottom trace) seems low at first glance, but makes sense when you think about it....

The best way to get a feel for an RC helicopter is to perform what's called "bunny hops." Bunny hopping repeatedly will give the pilot an idea of how responsive the helicopter is so they can more confidently fly it. Bunny hops are also a good way to learn if the helicopter needs calibrating. For instance, if the helicopter turns right a lot when you're bunny hopping, you'll probably want to counter that by trimming the yaw to the left a bit....

You can see that the Buffalo Tech is still hopping along, but that the size of the hops has been greatly reduced....

SAS hard drives are dual-ported, each featuring his unique SAS ID, which means that it is possible to use two physical data connections to provide redundant data paths to two different hops/hosts....