Page 1:PSUs At A Reasonable Price
Page 2:Corsair CX400W
Page 3:Corsair CX400W: Measurements
Page 4:FSP Saga II 400
Page 5:FSP Saga II 400: Measurements
Page 6:Huntkey Jumper 450B
Page 7:Huntkey Jumper 450B: Measurements
Page 8:Xigmatek NRP-PC402
Page 9:Xigmatek NRP-PC402: Measurements
Page 10:Test Configuration And Short Circuit Tests
Page 11:Antec EA-380D Green
Page 12:Antec EA-380D Green: Measurements
Page 13:Chieftec BPS-450S
Page 14:Chieftec BPS-450S: Measurements
Page 15:Enermax PRO82+ II (425 W)
Page 16:Enermax Pro82+ II: Measurements
Page 17:Test Configuration And Short Circuit Tests
Page 18:Hold-Up Time, Inrush Current, And Peak Load Tests
Page 19:Efficiency In Accordance With 80 PLUS Specification, Temp., And Standby Power
Page 20:Load Profiles Efficiency Overview
Page 21:Conclusion And Recommendations
In our last PSU article, we reviewed a bunch of relatively expensive high-performance devices suitable for powerful gaming computers and workstations. The average user typically prefers something a little bit more affordable, though, which is why today we're reviewing a handful of PSUs that can be found for around $75.
The potential reasons for buying a new PSU are many. Perhaps you've added a new graphics card, upgraded to a high-performance CPU, or are just replacing a faulty unit. A normal system usually doesn't require a high-end PSU. In most cases, the consumer is simply on the lookout for a cheap (and at the same time reliable) power supply at a reasonable price, so that's precisely what we decided to look at here.
The request we sent to manufacturers was simple: send us PSUs with a maximum street price of $75, regardless of wattage, features, or 80 PLUS certifications. What do you get in this price range?
Unexpected Early Goodbye
Our first test was originally made up of nine PSUs ranging from 400 to 500 W. We say "originally," because the AXP 500P12P died just as testing was getting started. With a load of 380 W, the 500 W PSU gave out a loud bang, sent sparks flying, and finally vanished in a smoky death. Since we were not expecting something like that at such an early phase in the testing, we'll give AXP the chance in a later article to prove that this was an isolated incident.
Then There Were Eight
Eight test candidates ultimately made it through the tests performed in our laboratory. Antec, Chieftec, Corsair, Enermax, FSP, Huntkey, Xigmatek, and a new AXP 500P12P were all included at capacity points between 380 to 500 W. That's enough power for most office and home entertainment computers. Despite a low street price of roughly $75, six of the PSUs even managed to achieve coveted 80 PLUS certifications. Antec, Chieftec, Corsair, Enermax, Xigmatek, and Huntkey all step things up with a Bronze-level cert. In order to earn that badge, PSUs must reach the following efficiency goals at 115 V: 82% at 20% of maximum power, 85% at 50% of maximum power, and 82% at 100% of the maximum power.
The AXP PSU can only do that under 230 V and thus cannot get certification. Similarly, the FSP PSU is only intended for 230 V applications and thus cannot receive the certification either. The pair of PSUs is completely useless here in the US. Nevertheless, our measurements will show whether they can still impress the European crowd.
Noticeable Differences In Quality
While we wanted to stay impartial before the testing, we couldn't help but notice the differences in quality during the unboxing process. Manufacturers tried to keep costs under control by skimping on the number of connectors, as well including shorter, lower-quality cables. None of these models feature a modular cabling design. Even the packaging is rather stripped-down. Further, the low weight of some PSUs at least suggests the use of cheaper components. This may not reflect immediately in testing. However, the power supplies might not last for as many years or support the same load strain as PSUs with higher caliber components.
Unfortunately, we did not get to see whether the PSU from AXP could hold its own against the other supplies, despite its lack of 80 PLUS approval. As with our first sample from the company, the second never even made it past the warm-up phase of testing. At a load of around 420 W (mind you, this is a 500 W PSU), several of the voltages rapidly dropped, the PSU produced some banging noises, sparks flew, and eventually the unit went up in smoke. After that, it wouldn't operate anymore and smelled like, well, fire. This video documents the failure of the PSU quite impressively. Check it out if you dig things going "pop."
- PSUs At A Reasonable Price
- Corsair CX400W
- Corsair CX400W: Measurements
- FSP Saga II 400
- FSP Saga II 400: Measurements
- Huntkey Jumper 450B
- Huntkey Jumper 450B: Measurements
- Xigmatek NRP-PC402
- Xigmatek NRP-PC402: Measurements
- Test Configuration And Short Circuit Tests
- Antec EA-380D Green
- Antec EA-380D Green: Measurements
- Chieftec BPS-450S
- Chieftec BPS-450S: Measurements
- Enermax PRO82+ II (425 W)
- Enermax Pro82+ II: Measurements
- Test Configuration And Short Circuit Tests
- Hold-Up Time, Inrush Current, And Peak Load Tests
- Efficiency In Accordance With 80 PLUS Specification, Temp., And Standby Power
- Load Profiles Efficiency Overview
- Conclusion And Recommendations