NTK - Wireless Repeating with the D-Link DWL-900AP+ : Introduction
Table of content:
Introduction
Ad
D-Link's 2.20 firmware update for its DWL-900AP+ Access Point has finally brought wireless repeating to the masses! What used to cost about $500 can now be had for about $100!
As explained in our Wireless Networking Product Types NTK, a Wireless Repeater eliminates the need to use an Ethernet cable to connect multiple Access Points (APs) together in order to extend the range of your wireless LAN. Figure 1 shows an example setup of a Wireless LAN (WLAN) using a wireless repeater to extend its range.

Figure 1: WLAN with wireless repeater
So is there any difference between what D-Link has done for $100 and other companies charge $500 for? I'll answer that and more, so read on!
- Next page What's the Catch?
Ad
Google Ads
Ad
The Miscellaneous Articles and reviews
- Wireless Bridging NTK
- ATI Increases Its Lead: The New Radeon 9700, 9500 PRO and 9500
- SMC Barricade Plus Cable/DSL Broadband router Review
- Hercules Fortissimo III 7.1 and Digifire 7.1
- How We Test SPI+NAT Routers
- The First Hammer Board Hits the THG Lab
- Rant-O-Matic: When Hard Drive Warranties And Expectations Collide
- Linksys BEFSX41 EtherFast Cable/DSL Firewall Router with 4-Port...
- D-Link AirPlus Enhanced 2.4GHz Wireless Access Point Review
- Wireless Networking NTK - Setting up
Reviews
Forum
- What price range should I be looking at for a 15" or 17" screen?
- Anyone know of any 10-bit panels?
- Rode NTK Interference problem
- Rode NTK with NOS mullard tubes -totally different animal!
- Rode NTK gone south?
- Wireless card not compatible, any suggestions?
- Triple booting question
- afraid of hardware support
- Acer VS Gateway