Hot Property: Pentium 4 Processor 560

Ad


The key temperature value for manufacturers is Tc.

The Pentium 4 Prescott is without doubt controversial, as the high power loss still verges on record-breaking. The versions with 2.8 to 3.2 GHz clock rates are now widely available in the shops - preferably bundled with a matching cooler. All Prescott CPUs are famous for reaching above-average temperatures when in operation, so that a sufficiently powerful cooler along with decent housing ventilation are absolute necessities.

The 3.4 GHz version is a rarity, and there is a waiting list for the 3.6 version. We are actually starting to think that Intel prefers to send the two really "hot" models to system manufacturers, so that they can build complete systems that are guaranteed to meet Intel specifications. As shown in the specification, the versions up to 3.2 GHz can convert a maximum of 84 W into thermal power, whereas the 3.4 and 3.6 GHz versions can manage up to 115 W.


The fastest P4 processors can convert an impressive 115 W into thermal power.

Platform Requirement Bit

The platform requirement bit, the PRB for short, is used to prevent motherboards being overloaded (not every board is bound to support the fast model). If this is used (for Model 550 and 560), the BIOS will know that the increased demands have to be met. If this is not guaranteed, then the processor will start with the smallest multiplicator (x14).

Protective Mechanisms

To ensure that the CPU can also cope with the comparatively high power load indefinitely, Intel has taken measures to accommodate the heat levels. The first is the well-known thermal monitoring mechanism, which modulates the clock rate flexibly when the PROCHOT signal (processor hot) is activated and, if necessary, carries out the duty cycles.

When the maximum chip temperature is reached, boards should also be able to shut down for safety reasons, which brings us to the second protective mechanism: the THERMTRIP signal is activated after a maximum temperature level is reached. According to the datasheet, this limit is approximately 20°C higher than the case temperature of the Tcase processor. THERMTRIP causes the whole system to switch off, in order to prevent damage to the processor.


  • Print
  • Send to a friend
  • Comment
  • Content also available in:
Ad
Talkback
Google Ads
Ad
The Miscellaneous Articles and reviews
News
Reviews
Videos