Let's Get To The Settings

06:00 - Saturday 13 November 1999 by Thomas Pabst
Source: Tom's Hardware – Keywords: make, your, own, athlon, overclocking, device

Let's Get To The Settings

Ad

The first table shows the 'FID' = frequency ID settings, more commonly known as the 'multiplier-settings'.

The next table is called 'BP_FID'. You need to adjust those settings too if you want your Athlon to work at the desired frequency you adjusted in the 'FID'-section. Please make sure to choose the same settings for the 'BP_FID' as you chose for the 'FID'.

Last but not least there is the table for the voltage selection. Please be reminded that increasing the voltage can damage your CPU and don't forget to re-read the comments I made in the first Athlon-overclock article .


Talkback
Be the first to comment on this review!

Note You are going to post a comment as anonymous.



  •
Submit my comment
Google Ads