Sign in with
Sign up | Sign in

How To: Building an Embedded Asterisk PBX

How To: Building an Embedded Asterisk PBX
By

Astlinux is a bundled distribution of the Asterisk open source iPBX private branch exchange (PBX) software and a Linux operating system. Originally developed by Mark Spencer at Digium, Asterisk is the leading open source software in the telephony/VoIP space. Asterisk excels at combining traditional TDM telephony capability - provided through hardware from Digium and others - with VOIP services. These include call routing, media gateway, media server and SIP signaling capabilities.

Asterisk in a small, quiet package

The Asterisk user community has been growing tremendously over the past two years, especially since the v1.0 release in the fall of 2004. With that growth has come the development of new distributions that bundle suites of software tools, to ease the setup and administration of a new Asterisk system. Asterisk@Home and Xorcom Rapid are both fine examples of this sort of activity.

Astlinux was developed by Kristian Kielhofner, and intended to go in a fundamentally different direction. Astlinux provides an Asterisk installation on a Linux distribution that has been built from scratch and optimized for small format hardware platforms - it takes what is essentially an embedded systems approach to Linux and Asterisk. In this article, I'll show you how to build an VoIP PBX using Astlinux and a Soekris Net4801 single board computer (SBC).

There are 0 comments.
This thread is closed for comments