Confusing Performance Data On Packaging And Case
Source: Tom's Hardware – Keywords: getting, the, right, power
Confusing Performance Data On Packaging And Case
In the PC store, even reading the label tends to confuse the user, because there is usually lots of conflicting performance data. First, we would like to explain the individual performance information using an example:
Confusing performance data on the packaging
The first information, about maximum power (420 watts), is just a reference by the manufacturer to the watt level for the purpose of advertising the power supply unit. It is not important for practical purposes .
Next to this, the manufacturers usually also include the maximum combined power of the +3.3- and +5-volt lines (220 watts) and/or the maximum combined power of +3.3-, +5- and +12-volt lines (400 watts). These numbers indicate the actual power that the +3.3- and +5-volt and the +3.3-, +5- and +12-volt power buses provide in combination. However, since PC components are supplied with power through the "+"-volt lines of the power supply unit, the maximum value for the combined power of the three "+"-volt lines warrants the most attention . That's because this value indicates the maximum power that is really usable for supply the PC components with power.
The "difference" between maximum power (420 watts) and maximum combined power (400 watts) is reserved for standby power and for the -5- and -12-volt lines no longer needed by most systems.
Tip: If the value for the maximum combined power of the +3.3-, +5- and +12-volt power bus is not given, you can calculate a good estimate for this value by subtracting 20 watts from the maximum power.
Not only the power figures, but also the currents of the individual strands are limited: 26 A, 42 A and 18 A are the maximum current of the +3.3-, +5- and +12-volt lines in our example. Good to know: With power supplies in the 300/320-watt class, the maximum permissible currents of the +5V line are about 25%, those of the +12V line average about 15 % less, than a power supply unit in the 400- or 420-watt class.
How a power supply unit should be labeled: Pictured, the HPC420-302 DF from Sirtec
The performance data on devices from Aerocool, Be Quiet, Global Win, Sirtec and Vantec is exemplary.
- Previous page Fighting System Blackouts
- Next page Stable Voltage = Stable Operation
- Noiseless Computing: New Case Innovation From Zalman
- 2003 Winter Case Review Part 2: The ATX Avalanche
- 2003 Winter Case Review Part 1: MicroATX Case Madness
- China Dispatch: Adventures in Case Manufacturing
- Three Red-Hot Boxed Cooler Alternatives for the Athlon XP3200+
- The Lazy Days of Summer Case Review
- Portable, Plug & Play, High-Performance Water Cooling: The...
- Prometeia Mach 2: Best Compressor Cooler for x86 CPUs
- High Power For Power Users: 13 Power Supplies In The Spotlight
- Spring Case Madness: 24 Of The Best
- The iPhone, Many Hits, Few Misses
- The Tivo DRM Issue
- Replacement for frozen TiVo freezes itself after less than..
- Tivo-friendly remote
- Are disk bearings really harmed by spin-up?
- No OFF button
- Compaq Presario R3000 power cord issue
- HELP ME DECIDE - CONFIGURING MY FIRST COMPUTER
- Need suggestions on a good brand to go with
- Require aid in choosing a system
-
extenal DNS address is not getting
-
The password does not meet the
-
pirates of the caribbean the siren
-
the lamest of the lame game
-
The night we got the bird
-
the sims 2
-
maiq the liar
-
the sims 2 torture
-
do i set up the bios
-
the best cpu
-
There is no disc in the
-
alone in the dark
-
testing the tech s
-
The 500 Gaming PC
-
pain the game
-
what is the best mb for
-
show the connections tab of IE
