Page 2:Packaging, Contents, Exterior And Cabling
Page 3:A Look Inside And Component Analysis
Page 4:Load Regulation, Hold-Up Time And Inrush Current
Page 5:Efficiency, Temperatures And Noise
Page 6:Cross-Load Tests And Infrared Images
Page 7:Transient Response Tests
Page 8:Ripple Measurements
Page 9:Performance, Performance Per Dollar And Noise Ratings
FSP's Aurum PT series PSUs are 80 PLUS Platinum-certified and fully modular. Today we will take a look at the series' 1000W mid-level unit.
FSP is one of the largest PSU manufacturers today. In addition to its retail business, the company is also active as an OEM (original equipment manufacturer), collaborating with several companies, including Antec, be quiet!, EVGA, NZXT and SilverStone. FSP's main advantage as an OEM is its flexibility, which allows for the customization of products according to the needs of its partners. This is unique, as most of the other major OEMs avoid modifications to their platforms and products in order to keep costs down. As a result, they end up selling very similar power supplies as the companies working with them.
FSP's high-end Platinum series, code-named Aurum PT, currently includes three units with capacities ranging from 850 to 1200W. They all share an interesting external design along with a high-quality finish and fully modular cabling.
Today, we are evaluating the Aurum PT PSU, which has 1kW capacity, enough to power a potent gaming system with more than two graphics cards installed, so long as they're GeForce boards. AMD's high-end cards use a lot more power than the competition, so if you want to build a three- or four-way CrossFire system, then you need a beefier PSU and a capable air conditioning system.
The FSP PT-100FM PSU is rated for 80 PLUS Platinum efficiency, though the company doesn't provide information about the PSU's max operating temperature for continuous full-power delivery. As far as protection features go, they're all available, which we expect from a high-end product like this. In addition, FSP used a quality hydro-dynamic bearing (HDB) fan. It's not backed by a semi-passive mode, but the fan still spins slowly most of the time, even under high ambient temperatures and increased loads.
The dimensions of the PT-1000FM are quite large since its depth exceeds 19 centimeters; however, most normal-sized cases will accommodate this PSU without any problems. Finally, the seven-year warranty is impressively long, while FSP's price tag lands right around where we'd expect given a Platinum-rated 1kW PSU.
|Total Max. Power (W)||1000|
The single +12V rail can deliver a high level of amperes, easily covering the needs of a gaming system with multiple graphics cards. On top of that, the minor rails are very capable, given the needs of contemporary systems. But while the 5VSB rail has enough power, we would prefer if it could deliver up to 4A.
Cables And Connectors
|24-pin ATX connector (600mm)||20+4 pin|
|4+4-pin EPS12V (700mm)||2|
|6+2-pin PCIe (500mm+100mm)||8|
|Four-pin Molex (550mm+155mm+155mm)||6|
The PSU has enough connectors to fully utilize its capacity, including two EPS and eight PCIe connectors, all of which are available concurrently. In addition, a large number of SATA and peripheral connectors are provided, covering every possible configuration. The ATX and EPS cables are pretty long; however, this isn't the case for the PCIe cables, which are rather short at only 50cm in length. There is also a single SATA cable featuring four connectors with short distances between them (since hard drives are usually installed in close proximity). The remaining three SATA cables have their connectors installed at an adequate distance from each other. Finally, the 24-pin ATX connector uses 16-gauge wires for lower voltage drops, while the rest of the connectors use standard 18AWG wires.
Since this PSU features a single +12V rail we do not have anything to comment on about its power distribution.
- Packaging, Contents, Exterior And Cabling
- A Look Inside And Component Analysis
- Load Regulation, Hold-Up Time And Inrush Current
- Efficiency, Temperatures And Noise
- Cross-Load Tests And Infrared Images
- Transient Response Tests
- Ripple Measurements
- Performance, Performance Per Dollar And Noise Ratings