any reason why a computer case cant be made of wood?

I am a wood worker and enjoy working with exotic woods. Any reason a computer case cannot be made from wood?

Nope, lots of people do it. This is the one I built, as part of a desk.

Wow, Turpit. I'm really impressed. That's a nice case/desk.

The only question is: does wood adequately dissipate the heat produced by high performance components?

My only concern would be radiate EMI as wood does not shield
against electromagnetic radiation, But as log as your TV and cell phone still work---

Heat dissapation isnt a problem. The case runs 3 120mm fans in parallel, flowing about 100 CFM through a specifically designed single-plane path that flows over all components. From the intake (where you cant see it) on the bottom the air flows over the HDDs first (it can carry 8) then over the mobos/cards, past the PSU,s to the fans, and then through a sound trap. Flow should be 132CFM, but the filter reduces it a bit. The case is actually designed to carry 2 full systems, but I only have one in there right now as the mobo 'tray' needs to be altered slightly to allow for some dongles. All the interior wood surfaces are also isolated by 1/2 insch of sound damping foam. On a stock cooler, the CPU(E6600 on a P5W DH Deluxe) idles at 31~34C (varies with ambient)when the system is closed, with the door open it will drop 3' Under full load it hits 56`57'C, so Im fairly happy with the air flow

The door actually opens wider..to the point that its flush with the jamb so that the drives can be removed from the front.

dirtyd86 - This thread is from last Summer.

Grounding is absolutely, positively, 100% not a problem. I guarantee it!

A little more then last summer...

Hello

old thread? bah i don't care.

I would say that wood rocks as a case making material, far more character then steel aluminum and glass.
The reason i made my first wood case was a local PC store set up a case mod competition. I went to spectate the event
and was floored at what people were considering case mods. The winner had neat wire routing and a blue light, everyone else had a red light. It was quite a while ago and case modding was in its infancy for sure.

I made my case out of 3/4 in oak ( i later regretted due to weight) so i could do some interesting back cutting techniques.
I addressed the cooling concerns by leaving the top separate from the carcass so the heat could merely rise out of the box
helped by 3-6 inch fans mounted in the bottom of the case, i worked with physics (hot air rises) rather then against it.

The ATX mother board was mounted to sheet of steel (an old PC case skin), the power switch was an dual throw automotive toggle(steel) and the style if any was reminiscent of an old style radio (art deco) with some modern twists. A handle for carrying were 2 slender tapered aluminum door pulls that were mounted slight staggered but adjacent to each other giving an illusion of a single twisted handle. The 4 legs were also door pulls (smaller) that lifted the case from the floor to permit cool air to enter from the bottom. This case would still be in use today however the heavy weight and limited space inside for additional hdds led me to retire it about 4 years ago. I still cant part with it tho.

I think i may build another but perhaps for more extreme needs such as very large hdd capacity and maybe even a 2-3 PC in 1 case system. Time will tell.


jd

http://www.facebook.com/photo.php? [...] 1660396808
http://www.facebook.com/photo.php? [...] 1660396808
http://www.facebook.com/photo.php? [...] 1660396808

I built that myself with a very limited selection of tools. The motherboard is simply sitting on wooden blocks glued onto my "motherbaord/PSU tray".

wood will bend and flex due to moisture and temp. no company will make it for you