Windows 10 from HDD/SSHD to SSD
If i install Windows 10 on an HDD or SSHD, is it possible for me to transfer it to an SSD if i choose to add one or upgrade to one in the future? If so, how do i do it, and is it safe?
Given certain restrictions, yes, you can do it, and yes, it is generally 'safe'.
Of course...you should always have a backup. Not just for this type of maintenance, but always.
If the size of the new drive is larger than the actual consumed space on the old drive, you can clone the entirety over to the new drive.
You can't clone "only the OS", as many people ask to do. Basically, everything goes.
Specific steps for a successful clone operation:
Verify the actual used space on the current drive is significantly below the size of the new SSD
Download and install Macrium Reflect (or Samsung Data Migration, if a Samsung SSD)
Disconnect ALL drives except the current C and the new SSD
Run the Macrium Reflect (or Samsung Data Migration)
Select ALL the partitions on the existing C drive
Click the 'Clone' button
Wait until it is done
When it finishes, power off
Disconnect ALL drives except for the new SSD
This is to allow the system to try to boot from ONLY the SSD
Swap the SATA cables around so that the new drive is connected to the same SATA port as the old drive
Power up, and verify the BIOS boot order
If good, continue the power up
It should boot from the new drive, just like the old drive.
Maybe reboot a time or two, just to make sure.
If it works, and it should, all is good.
Later, reconnect the old drive and wipe as necessary.
Delete the 450MB Recovery Partition, here:
you should look into how much storage is on the SSD first . if it less then 100GB it will not be worth it. with windows 10 its recommended to have an SSD drive with at least 250GB of storage but some are able to get way with 120GB but run into a lot of memory managment when it comes to windows updates