Locking up while transfering large file

Thanks for the help. It came to my knowledge that my HD (HD103UJ) has several problems do to incompatibility with some SATA controllers. It's strange is that it does not occur with windows XP. Is there any way to use the windows default driver only and impede windows to update them?

Edit: I am a little choked by this:
http://www.laptop-junction.com/toast/content/unreliable-disk-samsung-spinpoint-f1-hd103uj-1-tb-tera-byte

Edit 2: I will later, on my job right now. But thank you for the help. Also on NVIDIA forums user with samsung HD where/are also reporting crashes and lockups. They recommended disabling NCQ. Will test and see if it helps. Thanks again!

Can you post an image of your Device Manager?

Best answer selected by steelbox.

Thank you. For your help Gandalf, actualy disabling NCQ in the NVIDIA driver painel made all the problems go away, and already copied 30+GB of an Blu-Ray backup with out a hinch. Though its susteined copy rate is at 36-37MB/seconds don't know if it is normal for a disabled NCQ driver, but it's better than an lockup.
Also it did not occur with W XP because XP has not native support for NCQ and needs an driver.

So here stay an hint for any user experiencing abnormal behavior with an Samsumg HD103UJ or similar from SUmsung and an NVIDIA chipset. Uncheck NCQ in Device Manager / IDE ATA/ATAPI controllers / NVIDIA nForce Serial ATA Controller. Click on properties. OR use XP.