Tom's Hardware > Forum > Computer Peripherals > Printers > Why wont my pcs see a successfully connected wireless printer?

Why wont my pcs see a successfully connected wireless printer?

Forum Computer Peripherals : Printers Why wont my pcs see a successfully connected wireless printer?

I have Epson WorkForce 840 and Stylus 515 printers. They are 100% successfully connected to my wireless network with static IP's. I can see and ping them from the router, but my PC's refuse to see them.

I have tried from 32 and 64 bit Windows 7 machines as well as a 32 bit Vista machine. All drivers installed. I have turned off firewalls and opened up every sharing option I can find and it just wont work. I know it is not the printers as they both are new and work fine plugged directly into the router.

Am am at a total loss. HELP!

Todd

Reply to toddcoutu

You can't ping the printer IPs at all from the computers? Did you use the same IP range and subnet as you did for the PCs? Meaning if your PCs are 192.168.1.4, your printers need to be 192.168.1.7 and not .2.7 or something.

Message edited by hang-the-9 on 02-07-2012 at 07:28:44 PM

------------------------------ Recommended Video Cards: http://www.tomshardware.com/review [...] ,3085.html
Reply to hang-the-9

I cannot ping the printers from the PC's at all, it is as if they do not exist. When I log into my router (Verizon Fios) I can see and ping the printers. I have ran the Epson configuration utility on all computers as well as attempted to set them up manually using the static IP's. I am at a total loss. The firewalls are off and all sharing is opened up. As I type this I realized that I have not disabled my malware apps, ill try that when I get home. I hardly think that would keep the PC's from even pinging them though.

Reply to toddcoutu

The IP ranges that you used on the printers are correct? Gateway, subnet, etc.. were set? The firewalls on the PC would not keep the computers connecting to the printers. Some setting in the IPs you used is not right. Try using DHCP on the printers and try to connect to the IP they get from the router automatically.

------------------------------ Recommended Video Cards: http://www.tomshardware.com/review [...] ,3085.html
Reply to hang-the-9

You know what I need to check? I need to see if there is a Plug and Play setting on my router.

I will take another look at my IP's and make sure there is not a conflict someplace. Thanks for the attention to my issue!

Reply to toddcoutu

Plug and Play will only work for USB device configuration not IP-based. If you can't ping the printers, it's all in how the network is configured.

------------------------------ Recommended Video Cards: http://www.tomshardware.com/review [...] ,3085.html
Reply to hang-the-9

Ask the community Add a reply

Related content

See all topics related to "Why wont my pcs see a successfully connected wireless printer?"

Tom's Hardware > Forum > Computer Peripherals > Printers > Why wont my pcs see a successfully connected wireless printer?

Go to:

There are 907 identified and unidentified users. To see the list of identified users, Click here.

Page generated in 1.310 seconds

They won a badge

Join us in greeting them

17:08 aoaom won the Freshman badge
16:27 wuyu2241 won the Freshman badge
15:01 Cooky1992 won the Uniformed badge
15:01 medu5a won the Uniformed badge
15:01 mefa_star won the Uniformed badge
15:01 C4ptainpanda won the Uniformed badge
11:45 googlman won the Freshman badge
04:50 underwater mike won the Uniformed badge
04:40 tomstoms won the Freshman badge
04:24 dibetter won the Freshman badge

How do I win badges?

Partners

Why wont my pcs see a successfully connected wireless printer?

Forum Computer Peripherals : Printers Why wont my pcs see a successfully connected wireless printer?

General Discussion

Printers

CRT Monitors

Flat Panel Monitors

Digital Cameras

Webcams

Scanners