Download the Tom's Hardware App from the App Store
The reference for current tech news
Yes No
Tom's Hardware > Forum > Systems > Dell > [Solved] Instruction to replace dell 650 workstation motherboard

[Solved] Instruction to replace dell 650 workstation motherboard

Forum Systems : Dell [Solved] Instruction to replace dell 650 workstation motherboard

Best answer from king smp.

Word :    Username :           
 

Instructions for replacing 650 motherboard. I have the replacement, just need some help.

Thanks

Reply to harrykneppjr
Register or log in to remove.

Go to "support.dell.com" and enter the service tag number - OR enter the model number and follow the prompts. Then you can download the Service Manual and proceed from there.

I would suggest that you take some digital pictures of the existing setup before you start disconnecting stuff. And keep taking pics as you disconnect. This is what I did with my Dell Precision WS 490 when I added a drive, and did some modifications. Also, mine was purchased used, and the insides were covered in oil. I took out the fans and cleaned them with solvent, and did the same to the interior.

------------------------------ All things cometh to he that waiteth - provided he that waiteth, worketh like hell while he waiteth!
Reply to Ubrales
Best answer

^1 good advice Ubrales
Harry it is easier than you would think.
One piece of advice is buy heat sink compound Artic Silver and clean off heat sink of old and use new compound (about a pea sized dot in middle)
when you put in the cpu(s) match up the triangle in corner of chip with socket and let it kinda slide and drop in.When it is in place it should sink just a little.Then gently push down
I dont like using the latch because you lose your sense of feel and can bend a pin
If you do bend a pin sometimes you can carefully bend it back but lets hope that doesnt happen
When putting back together double check all power leads are in and front panel plug is in.
First time I did it i didnt put in front panel switch plug in and freaked out when it wouldnt turn on LOL.
Make sure Heatsinks lock down tight.

Reply to king smp

This topic has been closed by Mousemonkey

------------------------------ http://img545.imageshack.us/img545/3995/bl11.gif
Reply to Mousemonkey
Register or log in to remove.
Tom's Hardware > Forum > Systems > Dell > [Solved] Instruction to replace dell 650 workstation motherboard
Go to:

There are 810 identified and unidentified users. To see the list of identified users, Click here.

  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them