Download the Tom's Hardware App from the App Store
The reference for current tech news
Yes No
Tom's Hardware > Forum > Computer Peripherals > Flat Panel Monitors > DIY Dual LCD Monitor Stand

DIY Dual LCD Monitor Stand

Forum Computer Peripherals : Flat Panel Monitors DIY Dual LCD Monitor Stand

Related Content
You have searched for "DIY Dual LCD Monitor Stand" . You might be interested in the following threads:

See more for "DIY Dual LCD Monitor Stand"

Can't find your answer?
Ask!

General Discussion

|

Printers

|

CRT Monitors

|

Flat Panel Monitors

|

Digital Cameras

|

Webcams

|

Scanners

Word :    Username :           
 
ed3120   12-18-2007 at 04:38:43 PM
- 0 +

I'm getting a pair of 22 inch LCD monitors. I like the look of the VESA compliant monitor arms that leave the area under your monitor clear for your keyboard. The problem is, these stands cost about $200.

Does anyone have any ideas or know of any how-to guides where you can make something like this cheaper with some standard home depot-ish products?

Message quoted 1 times
Reply to ed3120
Register or log in to remove.
teknicald42   06-16-2009 at 08:06:26 PM
- 0 +

Have you gotten any feedback on this? I'm going to the HW store to night and take a look around. I want the arms to be gas charged...or spring supported..

Has anyone done this with one monitor? I'm thinking with dual your going to need to fabricate a member to have both monitors stuck on and then your mount support bolt to...

Lets have some fun.

Reply to teknicald42
ed3120   06-16-2009 at 10:35:08 PM
- 0 +

I've had this one for about 18 months now. I absolutely love it. Solid and high quality.

http://www.amazon.com/Monitor-Stan [...] B001HHNCQY

Reply to ed3120
acstudios   02-06-2010 at 09:33:29 AM
- 0 +

I recently received a stand from http://custommonitorstandsusa.com and couldn't be happier. It has 6 adjustable articulating arms which allow me to position everything to my liking.
:bounce:

Reply to acstudios
ampedal   02-12-2010 at 07:52:12 AM
- 0 +

I'm a big fan of a saw, drill, plywood, and 2x4's

no one else?

Although, I would be interested in working with other materials if they were cheap...

------------------------------ Check out an awesome PvP MMO: http://bit.ly/dexUl1
or
My girlfriend's Etsy: http://snappdragyn.com
 Reply to ampedal
sh1nn3r   03-17-2010 at 05:35:15 PM
- 0 +

ed3120 wrote :

I'm getting a pair of 22 inch LCD monitors. I like the look of the VESA compliant monitor arms that leave the area under your monitor clear for your keyboard. The problem is, these stands cost about $200.

Does anyone have any ideas or know of any how-to guides where you can make something like this cheaper with some standard home depot-ish products?




They are a bit expensive but I found some good lcd monitor arms you can email the guy there he can help you out.

They have this chief brand that you can mount to the wall Lcd arm mount to wall as well as a bunch of other mounts. Ask for chris at www.mountedconcepts.com

Reply to sh1nn3r
Anonymous   04-21-2010 at 07:45:53 PM
- 0 +

i know what u mean by wanting to be able to build it and taken pride in what you built what i would say is to take your monitors( im assuming your screen is a vesa mount) you need to find the distance from the mount to the edge of your screen that will give you have the span of the 2x4 depending on the size of your monitor's i would say anything from 2to6 lag bolts into a stud.

and if you want them to have a slight angle i would suggest using a cardboard mock up to find the angles. or even better the arm can go out in a v like manor and mount the screens with a pivot. i dunno this is what i was thinking how doing and this is how i was ganna move forward with it. i hope this helps.

Ryan

Reply to Anonymous
Anonymous   09-02-2010 at 10:28:25 PM
- 0 +

Go to Home Depot plumbing dept. Find the galvanized pipe section.
Get 3 1/2"X12" pipes, 3 1/2" floor flanges, 1 1/2" "T", 2 1/2" 90 deg elbows, 2 2"X1/2" nipples.
Next find some scrap plywood or sheet metal and cut 2- 5" squares. Drill 4 clearance holes in the corners at 10mm spacing (VISA) for mounting to monitors and 4 more holes to mount each to a floor flange.

I think you can figure the rest. It allows for up-down adjustment but not left-right (unless you bend the pipes). Suggest you use a cardboard mock-up to get angles right.

Cheers!
Cruz

Reply to Anonymous
Anonymous   09-02-2010 at 10:50:49 PM
- 0 +

Update--
www.monoprice.com has amazing prices on dual monitor stands.

Cruz

Reply to Anonymous
buwish   09-19-2010 at 01:14:44 PM
- 0 +

This topic has been closed by Buwish

------------------------------ -Kevin

Can you access TH on your smart phone?

 

Reply to buwish

Register or log in to remove.
See all topics related to "DIY Dual LCD Monitor Stand"
Tom's Hardware > Forum > Computer Peripherals > Flat Panel Monitors > DIY Dual LCD Monitor Stand
Go to:

There are 809 identified and unidentified users. To see the list of identified users, Click here.

Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.447 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them
How do I win badges?
Partners