Penny & Giles Faders

Archived from groups: rec.audio.pro (More info?)

Hi there,
I'm looking to buy some P&G 6" long faders type 1522.
Please contact me if you have any spares.
Thanks!

Archived from groups: rec.audio.pro (More info?)

"midge" <jimharpur@aol.com> wrote in message
news:1110884001.086798.242430@o13g2000cwo.googlegroups.com...
> Hi there,
> I'm looking to buy some P&G 6" long faders type 1522.
> Please contact me if you have any spares.
> Thanks!
>
Can you give us some kind of spec. P&G made a significant range of faders
and there might be a substitute.

Regards, Mike

Archived from groups: rec.audio.pro (More info?)

In article <1110971874.828887.298410@z14g2000cwz.googlegroups.com> jimharpur@aol.com writes:

> Sorry, but that's all the info written on them.

Contact Dale Manquen at http://www.manquen.net/

His company, MANCO, is the sole distributor for small quantities of
P&G parts in the US and he knows a lot about a lot of stuff. He has
some resources for old parts as well as repair parts and if anyone can
help you out, he's the one.

He likes model trains, too.



--
I'm really Mike Rivers (mrivers@d-and-d.com)
However, until the spam goes away or Hell freezes over,
lots of IP addresses are blocked from this system. If
you e-mail me and it bounces, use your secret decoder ring
and reach me here: double-m-eleven-double-zero at yahoo

Archived from groups: rec.audio.pro (More info?)

midge Wrote:
> Hi there,
> I'm looking to buy some P&G 6" long faders type 1522.
> Please contact me if you have any spares.
> Thanks!

I'm not reading this on Usenet so I don't have your email address... if
you feel like it, you can email me at Fletcher@mercenary.com

I have a whole bunch of P&G faders... many new in the box, some with
"Neve" face plates... lemme know what you need and I'll let you know
what they'll cost.

Peace.


--
Fletcher