How to map drives on devices connected to a second router?

Hi,

I have the following issue.
I am using 2 routers.
No 1 establishes PPPoE connection.
No 2 gets its WAN connection from router No 1 via DHCP server.
No 2 runs DD-WRT and is connected via OpenVPN to a VPN provider, so that all devices, which connect via No 2 have an encrypted VPN connection.
However I want my PC to not go through the VPN tunnel and have therefore connected it to router No 1.
Problem now is that I don't know how to connect to the devices, which are connected to router No 2.
Before I had my PC connected to Router No2 as well and used several mapped drives to a NAS and a Multimediaplayer also on No2.
Now that the PC is directly connected to No 1, I have no clue how to map the drives on all the devices on No2.
Can anybody help me please?

Regards
PHil

I could be reading this wrongly but I think you need a second NIC. Router 2 is probably on a different Subnet.

First, though, open a Run command using the Windows key and R together then into the Open box, type devmgmt.msc and hit Enter. From the View menu, select "Show hidden devices" and see if the second router shows up as a non- Plug and Pray device. If it does, try mapping again.