Download the Tom's Hardware App from the App Store
The reference for current tech news
Yes No
Tom's Hardware > Forum > General Networking > LAN/WAN > Lan device stopped working on manage cisco 300 switch

Lan device stopped working on manage cisco 300 switch

Forum General Networking : LAN/WAN Lan device stopped working on manage cisco 300 switch

Word :    Username :           
 

hi, i was using dlink 10/100 switch, i recently changed it with a cisco 300 gigabit manage switch. All device working except my fingerprint machine. Its nt even pinging. Plz help wht to do.

Reply to sandy_2982
Register or log in to remove.

Perhaps the fingerprint machine has a specific ip address built into its firmware and that address is not in your current subnet. Check the fingerprint machine to see if it has an ip address or look at its user manual to determine how to change its address.

You could change the ip address on the fingerprint machine to one in the dhcp range or you could assign the fingerprint machine a reserved dhcp address (works like a static address within the dynamic range) by entering the fingerprint machine MAC address in the router's reserved dhcp table and select an address within the dynamic assignment range that is not already assigned. From then on, the FM will always be assigned that address and will be within the subnet.

Reply to Realbeast

Realbeast wrote :

Perhaps the fingerprint machine has a specific ip address built into its firmware and that address is not in your current subnet. Check the fingerprint machine to see if it has an ip address or look at its user manual to determine how to change its address.

You could change the ip address on the fingerprint machine to one in the dhcp range or you could assign the fingerprint machine a reserved dhcp address (works like a static address within the dynamic range) by entering the fingerprint machine MAC address in the router's reserved dhcp table and select an address within the dynamic assignment range that is not already assigned. From then on, the FM will always be assigned that address and will be within the subnet.




Thanks for your suggestion,
But i come to know that FM has 10/10 network card n that doesn't supported by Cisco SG300. I make changes in SG300 but doesn't work . i tried all the ways ....nothing helped ..

Reply to sandy_2982
Tom's Hardware > Forum > General Networking > LAN/WAN > Lan device stopped working on manage cisco 300 switch
Go to:

There are 432 identified and unidentified users. To see the list of identified users, Click here.

  • Ask the community now
  • Publish
Ad
Latest best answer
General IT Vocabulary Help
By TheViper, 907 days ago:

Bus Speeds - The most commonly inferred bus is the Front Side Bus. This is the...

They won a badge
Join us in greeting them