connect two computers with each other and in between them there are two wireless routers through those wireless routers make a connection between the two PCs
You can do this but the one router must be used as Access point and the other used to client mode,you must check if it is supported as a mode by your router.
Hamza,
If you haven't bought wireless routers yet, then you may check for Linksys WRV200 routers. you can get it done with its WDS settings. Or check for any router with WDS. you can ask me if you want any help regarding WDS.
You can do this but the one router must be used as Access point and the other used to client mode,you must check if it is supported as a mode by your router.
ok.how am i suppose to set that wireless router as an access point..? and as well the other one put it as client.?
ok.how am i suppose to set that wireless router as an access point..? and as well the other one put it as client.?
By default routers are setup as access points. To setup you first need to plug the computer in to one of the LAN ports on the router (NOT THE WAN Port). Then you can access the setup, via a web UI. The hardest part is knowing what the ip address is of your router. Hopefully it came with documentation telling you this stuff. Most of the time there are at http://192.168.1.1 or http://192.168.0.1 Then you will need to log in, again look in the documentation for the user name a password, usually it has something to do with admin Then should be setting on the WiFi you can give it a name and setup the security.
Personally I wouldn't use 2 routers, I would use 1 router as the access point with one of the computer plugged in to it, then buy a wireless adapter for the other computer. Something like this would do the trick http://www.newegg.com/Product/Prod [...] 6833704045
Message edited by Catsrules on 01-25-2012 at 02:24:25 AM