Download the Tom's Hardware App from the App Store
The reference for current tech news
Yes No
Tom's Hardware > Forum > General Networking > Routers & Gateways > [Solved] Di-604 cant do 2012

[Solved] Di-604 cant do 2012

Forum General Networking : Routers & Gateways [Solved] Di-604 cant do 2012

Related Content
You have searched for " [Solved] Di-604 cant do 2012" . You might be interested in the following threads:

See more for " [Solved] Di-604 cant do 2012"

Can't find your answer?
Ask!

Best answer from boh88ca.

General Discussion

|

Routers & Gateways

|

VPN, Remote Connection, VoIP & Video Conferencing

|

LAN/WAN

|

Firewalls

Word :    Username :           
 
ricgal   01-03-2012 at 06:30:18 AM

The date in my router cannot be set manually to 2012
d-link di-604

Message quoted 2 times
Reply to ricgal
Register or log in to remove.
hang-the-9   01-03-2012 at 09:10:50 PM

http://www.dlink.com/products/defa [...] -604&tab=3 find your exact version of the device, see if you can get updated firmware for it.

If not, and you can't do anything about the data and it's causing issues, look for a new router.

------------------------------ Recommended Video Cards: http://www.tomshardware.com/review [...] ,3085.html
 Reply to hang-the-9
boh88ca   01-03-2012 at 11:07:30 PM

I think i can help you
Go back to dlink welcome page..there is a section on day and time and click on "copy from my computer " or something like that..i cannot remember exactly but if you are stuck,tell me and i will check it for you

Reply to boh88ca
boh88ca   01-04-2012 at 04:59:27 AM
Best answer

ricgal wrote :

The date in my router cannot be set manually to 2012
d-link di-604



Here it is:


open up dlink
go to tools and time
look for manual , enter your own settings..
computer clock
time zone,make sure you choose it
daylight saving,enable
apply

good luck

Message quoted 1 times
Reply to boh88ca
ricgal   01-11-2012 at 08:03:32 AM

boh88ca wrote :

Here it is:


open up dlink
go to tools and time
look for manual , enter your own settings..
computer clock
time zone,make sure you choose it
daylight saving,enable
apply

good luck




Thanks for the answer.
I did update my main router, but I now have a couple of these other units around, which I am going to slave as needed.

Reply to ricgal
boh88ca   01-12-2012 at 11:38:22 PM

Thanks.. i hope your d link works..
When i prep my slave router,i set it to the attached pc's internal clock ( same procedure as my master dlink)

Now i have both d links with the same timing!
Good luck!

Reply to boh88ca
Scifi07   03-08-2012 at 01:59:51 AM

ricgal wrote :

The date in my router cannot be set manually to 2012
d-link di-604



I have the same router. I solved the problem by creating a custom html file. I included a javascript to copy the system time from my browser/computer.

Whenever I need to set my router time (after a power-outage or routercrash), I just use this file.

The html is in the spoiler below! (Remember to replace 192.168.0.1 with your router ip.). It should be perfectly safe, but the usual disclaimer applies. Ie, don't blame me if it blows up your computer/router.

Spoiler :

<html>
<head>
<SCRIPT LANGUAGE="JavaScript" type="text/javascript">
<!--
function pad(n)
{
n = n.toString();
if (n.length == 1)
{
return '0' + n.toString();
}
return n.toString();
}
function load()
{
var d = new Date();
var y = d.getFullYear();
document.f.TTY.value = (y-2000);
document.f.TTM.value = d.getMonth();
document.f.TTD.value = d.getDate();
document.f.TTh.value = d.getHours();
document.f.TTm.value = d.getMinutes();
document.f.TTs.value = d.getSeconds();
var m = 0;
var o = 0;
if ((y > 2010) && (y < 2200))
{
//Place Daylight Savings data here.
//m is dst start day, o is dst end date.
//Data below is dst dates for Norway.
if (y == 2010) {m = 28; o = 31;}
if (y == 2011) {m = 27; o = 30;}
if (y == 2012) {m = 25; o = 28;}
if (y == 2013) {m = 31; o = 27;}
if (y == 2014) {m = 30; o = 26;}
if (y == 2015) {m = 29; o = 25;}
if (y == 2016) {m = 27; o = 30;}
if (y == 2017) {m = 26; o = 29;}
if (y == 2018) {m = 25; o = 28;}
if (y == 2019) {m = 31; o = 27;}
document.f.DYD.value = m;
document.f.DYd.value = o;
document.f.DYF.value = 1;
document.getElementById('fxx').innerHTML = 'Javascript works! '+y+' DST data loaded.<br />';
} else
{
document.f.DYF.value = 0;
document.getElementById('fxx').innerHTML = 'Javascript works! No DST data tho :-/<br />';
}
}
//-->
</script>
</head>
<body onload="javascript:load();">
<noscript>Enable javascript to automatically load system time, date and dst's.</noscript>
<FORM ACTION="http://192.168.0.1/cgi-bin/sntp" METHOD=GET NAME="f">
<input type="hidden" name="RC" value="@sntp">
<input type="hidden" name="rd" value="x">
<input type="hidden" name="TS" value="">
<input type="hidden" name="tz" value="15">
<input type="hidden" name="TZ" value="60">
<input type="hidden" name="TE" value="0">

<table border="1">
<tr><td>
<h1>DI 604 Set time</h1>
Year: <select name="TTY">
<option value="11">2011</option>
<option value="12">2012</option>
<option value="13">2013</option>
<option value="14">2014</option>
<option value="15">2015</option>
<option value="16">2016</option>
<option value="17">2017</option>
<option value="18">2018</option>
<option value="19">2019</option>
</select>

- Month <select name="TTM">
<option value="0">Jan</option>
<option value="1">Feb</option>
<option value="2">Mar</option>
<option value="3">Apr</option>
<option value="4">May</option>
<option value="5">Jun</option>
<option value="6">Jul</option>
<option value="7">Aug</option>
<option value="8">Sep</option>
<option value="9">Oct</option>
<option value="10">Nov</option>
<option value="11">Dec</option>
</select>

- Day: <input type="text" name="TTD" value="14" length="2" size="2"> (1-31)<br>
<p>
Hour: <input type="text" name="TTh" value="21" length="2" size="2"> (0-23)<br>
Minutes: <input type="text" name="TTm" value="31" length="2" size="2">(0-59)<br>
Seconds: <input type="text" name="TTs" value="01" length="2" size="2">(0-59)<p>
</td><td>
<h1>DST</h1>
<select name="DYF">
<option value="1">active</option>
<option value="0" selected>disabled</option>
</select><p>

DST Start month: <input type="text" name="DYM" value="2" length="2" size="2"> (0-11)<br>
DST Start day: <input type="text" name="DYD" value="" length="2" size="2"> (1-31)<br>
DST end month: <input type="text" name="DYm" value="9" length="2" size="2"> (0-11)<br>
DST end day: <input type="text" name="DYd" value="" length="2" size="2"> (1-31)<br>
</td></tr></table>
<input type="submit"><p>
</form>
<div id='fxx'></div>
</body></html>

Reply to Scifi07
Register or log in to remove.
Ask the community Add a reply
See all topics related to "Di-604 cant do 2012"
Tom's Hardware > Forum > General Networking > Routers & Gateways > [Solved] Di-604 cant do 2012
Go to:

There are 465 identified and unidentified users. To see the list of identified users, Click here.

Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 3.933 seconds
  • Ask the community now
  • Publish
Ad
Latest best answer
General IT Vocabulary Help
By TheViper, 907 days ago:

Bus Speeds - The most commonly inferred bus is the Front Side Bus. This is the...

They won a badge
Join us in greeting them
How do I win badges?
Partners