Tom's Hardware > Forum > CPU & Components > Power Supplies, Cases & Mods > Carbide 500R Fan Setup (Help, please, first time builder)

Carbide 500R Fan Setup (Help, please, first time builder)

Forum CPU & Components : Power Supplies, Cases & Mods Carbide 500R Fan Setup (Help, please, first time builder)

The current set up for my Carbide 500R is...
Two 120mm front bottom, intake
One 200mm side (bottom-ish), intake
One 120mm back top, exhaust

I know the general rule is side + front = intake, and back + top = exhaust. Other than that, I know jack-diddly-squat. Just looking for the most efficient set-up.

So...

(1) Do I need to buy additional fans?
(2) How do I properly measure CFM to understand the flow of air?
(3) Since the case has holes all around, would it be better to create positive air pressure or negative air pressure?

I have not fully put together my first system (I will be doing it this saturday), so I do not have any heat metrics to share.

Message quoted 1 times
Message edited by kreax on 02-09-2012 at 08:09:38 AM

Reply to kreax

You don't need to measure nothing , look at the specs of the fans ( CFM ) and do a simple math. Your intake is huge , in your place ill put 2 more fans on top for a better outake.And if you have fan controller put the side fan to a slower rotation.

Message edited by sosofm on 02-09-2012 at 10:35:24 AM

------------------------------ i7 2600 , AsRock P67 Extreme 6 ,2x4GB Corsair Vengeance 1600 , MSI 6950 2GB , HDD WD 640 AAKS , Corsair 620HX 620W , CPU cooler Zalman CNPS10X Performa , CoolerMaster 912, Philips Led 22"
Reply to sosofm

@sosofm, thanks, I appreciate your advice, but the Carbide 500R doesn't indicate the CFM of the fans. I've checked. I've also tried searching for that information online, and the only thing I was able to pick up from information floating around is that the stock fans actually aren't very good. I've heard it from a few different sources, but I don't know how true those statements really are.

For some stupid reason, Corsair decided not to disclose the fan specs other than size, and that they are equipped with LEDs.

Edit: *facepalm*

I just came across this on corsair forums:

Front 120mm x 25mm
RPM - 1200
CFM - 43.2
dBA - 18
Static pressure - 1.6mm H2O
Power - 1.2 Watts

Rear 120mm x 25mm
RPM - 1200
CFM - 43.2
dBA - 18
Static pressure - 1.7 mm H2O
Power - 2.16 Watts

Seems like the source is credible. I will continue to look for information about the side 200mm fan. If anyone knows that off-hand, I would really appreciate it.

Message edited by kreax on 02-09-2012 at 11:05:01 AM

Reply to kreax

That is not such a big problem if you put the side fan to a lower speed and add 2 more fans on top of the case , if you do this you will have good air flow and good case cooling.

kreax wrote :

[b]I know the general rule is side + front = intake, and back + top = exhaust. Other than that, I know jack-diddly-squat. Just looking for the most efficient set-up.

So...

(1) Do I need to buy additional fans?
(2) How do I properly measure CFM to understand the flow of air?
(3) Since the case has holes all around, would it be better to create positive air pressure or negative air pressure?

Don't foget that your PSU will also act as an exhaust. To answer your specific questions:
1. I wouldn't buy any additional fans unless you get high temps using the front/side intake and rear/top exhaust setup.
2. You don't need to measure CFM...and wouldn't want to spend the cash to get the proper tools to do that. Simply monitor temps for your CPU/GPU. Your good to go as long as they aren't excessive at load. You can test this using CPUID to monitor hardware and running a stress test program like PCmark.
3. Again...stress test and monitor...don't overthink this!

------------------------------ Did you know that gullible isn't in the dictionary?!
Recommended PSU thread: http://www.tomshardware.com/forum/ [...] ended-psus
PSU Guide Thread: http://www.tomshardware.com/forum/ [...] lies-guide
Reply to Rugger

Ask the community Add a reply

Related content

See all topics related to "Carbide 500R Fan Setup (Help, please, first time builder)"

Tom's Hardware > Forum > CPU & Components > Power Supplies, Cases & Mods > Carbide 500R Fan Setup (Help, please, first time builder)

Go to:

There are 864 identified and unidentified users. To see the list of identified users, Click here.

Bestofmedia Forum ©
2000-2009 Bestofmedia Group

Page generated in 0.999 seconds

Latest best answer

Battery Compatibility issues in Windows XP on Gateway

By hang-the-9, 61 days ago:

If this is a 3rd party battery, issues like this are pretty much to be expected. If it's...

They won a badge

Join us in greeting them

17:08 aoaom won the Freshman badge
16:27 wuyu2241 won the Freshman badge
15:01 Cooky1992 won the Uniformed badge
15:01 medu5a won the Uniformed badge
15:01 mefa_star won the Uniformed badge
15:01 C4ptainpanda won the Uniformed badge
11:45 googlman won the Freshman badge
04:50 underwater mike won the Uniformed badge
04:40 tomstoms won the Freshman badge
04:24 dibetter won the Freshman badge

How do I win badges?

Partners

Carbide 500R Fan Setup (Help, please, first time builder)

Forum CPU & Components : Power Supplies, Cases & Mods Carbide 500R Fan Setup (Help, please, first time builder)

CPUs

Power Supplies, Cases & Mods

Sound Cards

Servers

NICs

Other Components

Akasa

Antec

Cooler Master

Cougar

DeepCool

Enermax