[Solved] Best 4x2gb 1333mhz memory kit

need a high speed and highly reliable 1333mhz 4x2gb ram from corsair or kingston memory under 50$..

http://www.newegg.com/Product/Prod [...] 6820145262

sorry i typed wrongly i need two 4gb 1333mhz ram

U can use this RAM, it is 1600, but your mobo will not loose any performance.

RAM has XMP and your mobo will be able to use the faster 1600MHz instead.

But, if u will insist on 1333MHz, this one is great!
http://www.newegg.com/Product/Prod [...] 6820231311

here are the specs
intel core i5 2400
Gigabyte H61M-S2P-B3
xfx pro series 450w
zotac gtx 560 1gb
seagate barracuda 3gb/s 500gb 7200rpm
as mine is a h61 overclocking is not possible so pls tell me the fastest 1333mhz 2x4gb ram for the above mobo..

from this site http://www.bit-tech.net/hardware/m [...] dge/5..its said that cl7 performs better than cl9..my doubt is the ram u mentioned is cl9 is this enough and is g skill better than corsair..

CAS Latency Timing

CAS latency timing is not something new to DDR3, and it is one of the few items that remains unchanged in the new format. You may wonder why I used the term "unchanged", when every enthusiast in every web forum world-wide has jumped on their soapbox and chastised anyone considering DDR3 because of the higher latencies. The simple fact is that you cannot extend base frequencies without also extending the CAS delay, and DDR3 is actually requires less latency in comparison.

As a quick refresher, you might recall that 1066MHz DDR2 began with CL5 and CL6 latencies, and eventually improved to CL4 in rare cases of special IC module binning. So it should be considered a vast improvement in comparison that 1333 MHz DDR3 can achieve CL5, and some 1800 MHz DDR3 modules such as Corsair's PC3-14400 kit which have received careful parts binning can operate on CL7 timings.

Putting this arguement into greater perspective, drift back to the first days of DDR2. I can still remember the complaints back then, although to a lesser extent, about the increased latency. Back in those days, 400 MHz DDR was often times seen with CL2 timings, so keep that in mind when you look at the 800 MHz DDR2 presently available at a 100% latency increase to CL4 timings. In comparison, the CL7 timings of 1600 MHz DDR3 are still ahead of the curve by 25%, or even up to 50% faster latencies with OCZ's CL6 DDR3.

The bottom line is that enthusiasts need to hone in on the truth behind the technology, and ignore the self-serving ignorance that often runs rampant in most technology forums. The same person who condescends the idea of using DDR3 is also the same person who doesn't know the reason for the difference in architecture. The reality of the matter is that DDR3 is actually a better memory in terms of latency timings, especially compared against DDR2. So now imagine how tight the timings will be once the now infantile manufacturing process evolves from 90 nm to 70 nm; these latency timings will only get better.

http://benchmarkreviews.com/index. [...] mitstart=3

is there any huge difference between latencies on real world performance.. as my mobo cannot support 1600mhz im staying with a 1333mhz with highest speed otherwise surely i would go to 1600mhz..

There are 3 top makers, does not matter, who do u get, if u are budget oriented.

It just happen that I like Corsair, because no problems.
I would buy G Skill too: )

thanks for the answers guys..found the required ram..