Search
See more for "[SOLVED] Memory for old HP server"
Hello, If I put this memory: http://www.newegg.com/Product/Prod [...] 6820231207 In this machine: http://h18000.www1.hp.com/products [...] aoid=35252 Will it run at the stick run at 800mhz or are the mobo dim slots locked in at 667mhz? If not, could i put a high speed in? Say something like this: http://www.newegg.com/Product/Prod [...] 6820231144 ..or would the voltage requirements (2.0V - 2.1V) be too much for the mobo to handle?
The link to the HP site is no good so I can't check on the system
Sorry about that..link is good now.
That memory wont work, you need ECC memory (unbuffered). Either of these will work: http://www.newegg.com/Product/Prod [...] x%202GB%29
I have a 2gb stick of ddr2 6400 that's non ECC working in the machine now. But I figured out the voltage thing. Thanks for your reply
Well, I was just going by the system specs. Best of luck to you.
Yes, all your paying for is the rental of the box, not the service going to it. The...
Mongox - bronze Expert
Specialties : Home Theater
1140 messages since 1970/01/01