Download the Tom's Hardware App from the App Store
The reference for current tech news
Yes No
Tom's Hardware > Forum > Motherboards & Memory > Memory > [Solved] Nvidia 780i - slots 1 and 3 suddenly not working?

[Solved] Nvidia 780i - slots 1 and 3 suddenly not working?

Forum Motherboards & Memory : Memory [Solved] Nvidia 780i - slots 1 and 3 suddenly not working?

Best answer from clutchc.

Word :    Username :           
 

Hi all,

My system (nvidia 780i SLI motherboard, all 4 DIMMS filled with 2GB Mushkin PC2-6400) was running fine for 2.5 years, until yesterday when it shut down. On reboot, I was getting C1 errors, suggesting something about the memory was no longer happy.

From the CPU side, this motherboard identifies its DIMM slots as 0 and 2, then 1 and 3. Running Memtest, I learned:

1. Individually, all 4 memory sticks successfully pass memtest in slots 0 or 2.

2. Individually, they each fail in slots 1 or 3.

3. I can put 2 sticks into slots 0 and 2 and pass, but because that's not the correct matching slot pair, the system thinks only 2 gigs are on board. Matching pairs are 0 and 1, 2 and 3.

4. Adding a third or fourth stick into 1 and/or 3, and I'm getting the C1 error again.

After, I tweaked the memory voltage up a bit, from 1.8 to 1.95v, even upping the north bridge to 1.4v. And tuned down the timing to 5/5/5/18/2T. No change, switched it back to defaults.

So, all 4 sticks seem fine, but slots 1 and 3 (the two furthest from the cpu) are suddenly unhappy. Bad memory controller on the motherboard, then? Is there anything I can do?

And even if not, is there a way I can get the mobo to recognize both 2 gig sticks sitting in non-paired slots 0 and 2?


Thanks for any help. Cheers.


Message edited by moarmin on 01-26-2012 at 05:20:45 PM
Reply to moarmin
Register or log in to remove.
Best answer

It appears you've proven your memory controller has failed. You may have to 'bite the bullet' and get a new or used board.

------------------------------ i5-2500K 3.3GHZ, Hyper 212 EVO, Gigabyte Z68XP-UD3P Board, 8GB 1333MHZ G.Skil Sniper, 2 x GTX 570 SC SLI, Crucial M4 SATA3 64GB SSD, WD 500GB HDD, X-FI Titanium, XFX 850W PSU, 32" @ 1920x1080
Reply to clutchc

This topic has been closed by Nikorr

------------------------------ Where there's smoke, there's fire...

 

Reply to Nikorr

Register or log in to remove.
Tom's Hardware > Forum > Motherboards & Memory > Memory > [Solved] Nvidia 780i - slots 1 and 3 suddenly not working?
Go to:

There are 920 identified and unidentified users. To see the list of identified users, Click here.

  • Ask the community now
  • Publish
Ad
Latest best answer
Can i use a comcast cable box at another location
By SmurfOnABoat, 144 days ago:

Yes, all your paying for is the rental of the box, not the service going to it. The...

They won a badge
Join us in greeting them
Top experts