Random mechanical "Clicks" and Write Error Rate (S.M.A.R.T.) increasing

Hello, everyone!
I decided to write on here as I have been shadowing the forums for a while and found invaluable advice quite often. I am sure someone will be able to assist me.

After 4 years, my Pavilion dv6000's 250GB WD hard drive began showing corrupted sectors. Being paranoid, I had backed my data up on several externals, and was even able to recover most of the contents even with a S.M.A.R.T. drive health of 58% and dropping.

However, seeing as I use my computer for pretty much everything, instead of buying a replacement HDD, I decided to purchase a Sony Vaio E1511, with a Seagate hard drive (ST750LM022).

I have been using this computer for 4 days, and I've noticed the following issues:

- once in a while, particularly when talking on Skype, I will hear a mechanical "click" coming from the hard drive, at totally random moments.

- i've come to associate that "click" with an increase of Write Error Rate/Multizone Error rate. The computer is barely a week old, and yet, my raw score is at 82 (I am attaching the full diagnostic at the bottom of my message)

- My Spin-Up time is reported by several pieces of S.M.A.R.T. software as being sub-par (a score of 89%).

Now, should I be concerned? Every time this "click" happens, the Write Error Rate increases by one.

Thanks in advance,
Erik


==== S.M.A.R.T. data follows ====

Read Error Rate,1,100,51,OK
Throughput Performance,0,252,0,OK
Spin-Up Time,3470,89,25,OK
Start/Stop Count,25,100,0,OK
Reallocated Sectors Count,0,252,10,OK
Seek Error Rate,0,252,51,OK
Seek Time Performance,0,252,15,OK
Power-On Hours (POH),64,100,0,OK
Spin Retry Count,0,252,51,OK
Recalibration Retries,438,100,0,OK
Power Cycle Count,28,100,0,OK
G-sense error rate,5,100,0,OK
Power-off Retract Count,0,252,0,OK
Temperature,184684904482,34,0,OK
Hardware ECC Recovered,0,100,0,OK
Reallocation Event Count,0,252,0,OK
Current Pending Sector Count,0,252,0,OK
Uncorrectable Sector Count,0,252,0,OK
UltraDMA CRC Error Count,0,200,0,OK
Write Error Rate/Multi-Zone Error Rate,82,100,0,OK
Load/Unload Retry Count,438,100,0,OK
Load/Unload Cycle Count,943,100,0,OK
Free Fall Protection,3,100,0,OK
2 answers Last reply
More about random mechanical clicks write error rate increasing
  1. if the hard disk is clicking, it is faulty. you should exchange the computer if its still under warranty.
  2. I got a replacement, and it clicked as well, to be honest. Sony sent me back the original model saying they had run diagnostics and found no flaws. :S
Ask a new question

Read More

Hard Drives Storage