[Solved] Question Regarding Intel’s Integrated RAID Controller

I have been researching the performance of placing 2 SSD’s in RAID 0. Many of the benchmarks I have seen show transfer rates of approximately 1100 MBps. These numbers seem theoretically achievable in RAID 0 on SATA 3. So is Intel’s fake/Matrix RAID being used to attain these numbers or are these numbers coming from $300 discreet RAID cards? I originally had no intention on putting two SSD’s in a RAID but I was given a new 120GB Agility 3 and I already had a 120 GB Agility 3 (1 month old), and it now seems pointless not to RAID. As I understand Intel will be implementing TRIM for RAID in their new drivers during 1H 12 so that problem is resolved, and since I do not intend on putting these two drives in RAID until I can get a Z75 motherboard in the April May time frame I have time for the software to work itself out. In short is 1100MBps achievable on Intel’s Matrix RAID?

If my initial post was too long I apologize. Is there no one that operates in this configuration that can answer this question? Do I need to put this in the SSD forum? Thanks for viewing, any insight would be great.

Best answer selected by navalweaponsofficer.