Related Content
You have searched for "Chaintech 7nil1" . You might be interested in the following threads:
Motherboards
|Memory
|Chipsets & Bios
|Abit
|Aopen
|ASRock
|Asus
|Chaintech
|Corsair
|DFI
|Elitegroup
|Epox
|FIC
|Foxconn
|G.SKILL
|Gigabyte
|Jetway
|MSI-Microstar
|Shuttle
|Soyo
|Supermicro
|Tyan
Hello,
I have a Chaintech 7nil1 MB. And currently running an Barton 2500+. Early on after I purchased the board I contacted support so I could install an AMD Athlon XP(Barton)3200+, which it was suppose to be able to run. The manual shows jumper 25 (has 3 pins)is to set the CPU FSB. 1-2 is for 133/166MHz(Man. states: this will allow CPU Ext.freq. and Mem freq. to be adjusted in Bios) and 2-3 is for 100MHz (Man. states: this will allow mem. freq. to be adjusted in Bios). Support told me to set it on 1-2 166/200MHz (note how man. reads) So I assume I'm to set the jumper to 1-2 and adjust CPU freq. in Bios. However the freq. only goes to 265MHz in Bios ( the 2500 is suppose to run at 333MHz) and the 3200 runs at 400MHz. Will that limit change when I put the 3200+ in? And what should I set the FSB for now? (it's only on 100MHz now) Thz in advance, Letitbe 
| canadian69 wrote : Some revisions of the board shipped with 333/400MHz support and that info was included in a addendum sheet to the manual. The best I can suggest is you look for a BIOS update. No telling if it will work though.
|
There are 4 settings in the bios. Optimal, Agressive, Turbo, and Expert. The expert will allow full control over board. Clear up to 250MHz or 500DDR. It starts at 100MHz and goes up 1MHz at a time. I should have just looked harder. But really!! Thz!! 
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
2000-2009 Bestofmedia Group
Page generated in 0.722 seconds
Please mind
You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.
Ad
Latest best answer
Can i use a comcast cable box at another location 
By SmurfOnABoat, 144 days ago:
Yes, all your paying for is the rental of the box, not the service going to it. The...
They won a badge
Join us in greeting them
- 17:08 aoaom won the Freshman badge
- 16:27 wuyu2241 won the Freshman badge
- 15:01 Cooky1992 won the Uniformed badge
- 15:01 medu5a won the Uniformed badge
- 15:01 mefa_star won the Uniformed badge
- 15:01 C4ptainpanda won the Uniformed badge
- 11:45 googlman won the Freshman badge
- 04:50 underwater mike won the Uniformed badge
- 04:40 tomstoms won the Freshman badge
- 04:24 dibetter won the Freshman badge
Top experts
Partners
