Tom's Hardware > Forum > Overclocking > Heatsinks & Air Cooling > [Solved] Thermalright silver arrow

[Solved] Thermalright silver arrow

Forum Overclocking : Heatsinks & Air Cooling [Solved] Thermalright silver arrow

I'm thinking about overclocking my rig with stock voltages right now because I want to read more into it before I get all nitty gritty. It looks as though most people advise one to not overclock the i5 2500k w/o getting an aftermarket cooler. Right now my rig is running the i5 2500k, msi p67a gd65, 16gb corsair 1600mhz ram, 2x powercolor 6870's 1300w psu. I checked to see if it would fit and it will. Is there anyway to put a third fan on it, it says on the thermalright website you can, I just haven't seen it though. If you even can is it even worth it as the performance gains may be negligible.

Reply to ryfry

Ya just put the extra fan on the rear side(back of case).
Great cooler,although you'll have fit issues if your ram kit isn't low profile.
You'll have no choice but to use the rear position.
Example with Dominators which are the same height as regular Vengeance.
http://www.hardocp.com/article/201 [...] t_review/2

Message edited by davcon on 02-07-2012 at 04:49:40 AM

Reply to davcon

sweet! are there any better coolers for the price? The only benchmarks i saw were comparing the three fans vs the noctua nh d14 which only had 2 fans

Message quoted 1 times

Reply to ryfry

Best answer

ryfry wrote :

sweet! are there any better coolers for the price? The only benchmarks i saw were comparing the three fans vs the noctua nh d14 which only had 2 fans

You're going to eventually get some feedback saying the Noctua D-14 is better.
I don't think so,i think they're on par.
What i will say is the TY-140mm fan is better and quieter then any fan Noctua makes.
The SA comes with two.
The only other coolers i would consider is the Archon or TS 140,provided you have a wide case at least 9" wide.
You do realize a CM Evo will sufficiently cool a 2500K @ 4.5GHz for very little cost.

Reply to davcon

nobody's ever reccomended it to me, I havent read many reviews on coolers as my mpc subscription ran out. I know the hyper212 is crowd favorite, mpc had very good reviews of most zalmans so I was originally looking at them. I saw someone post in here having the same case as me saying you could fit any cooler in this case under 110mm so yeah...

Message quoted 1 times

Reply to ryfry

ryfry wrote :

What case do you have?

Reply to davcon

Antec 900

Message quoted 1 times

Reply to ryfry

ryfry wrote :

Antec 900

The Antec 900 is 8.1" wide.
I would just get a good $30-50 cooler that's 152-160mm tall.
The 212+ or Evo are very good and compatible with most ram kits.
The Zalman Performa is also a very good cooler for the price.
I like Zalman CNPS10X tower coolers,not too crazy about the orbital ones(non-replaceable fans).

Message edited by davcon on 02-07-2012 at 08:20:16 PM

Reply to davcon

There is a mount on the side that gets in the way of somefans thats why they said in another thread, unless you mod the case you need a smaller one. I was planning on getting the sa for future use when I start to overclock more heavily.

Message quoted 1 times

Reply to ryfry

ryfry wrote :

Yes i know about that.
I have a 902 with the same side mount fan clips.
I also have a 160mm tall cooler installed with about 1/4 inch to spare = my 902 is 1/2 inch wider though.
You can cut or trim down those fan clips.
No big loss for better cpu cooling imo.
Side fans only drop temps 1-2C = cpu cooler 10C+ easy.

Reply to davcon

I dont really have the tools to mod the case atm (college) but i didnt really plan on putting a fan in there anyway as people would say it can disrupt the airflow

Reply to ryfry