Download the Tom's Hardware App from the App Store
The reference for current tech news
Yes No
Tom's Hardware > Forum > Overclocking > Heatsinks & Air Cooling > [Solved] Auto fan controller - turns off fans

[Solved] Auto fan controller - turns off fans

Forum Overclocking : Heatsinks & Air Cooling [Solved] Auto fan controller - turns off fans

Related Content
You have searched for " [Solved] Auto fan controller - turns off fans" . You might be interested in the following threads:

See more for " [Solved] Auto fan controller - turns off fans"

Can't find your answer?
Ask!

Best answer from scout_03.

General Discussion

|

CPUs

|

Motherboards

|

Graphics Cards

|

Memory

|

Chipsets & Bios

|

Heatsinks & Air Cooling

|

Water Cooling

|

Intel

|

AMD

Word :    Username :           
 
bushidowarrior   02-03-2012 at 01:45:26 PM

Hello,

I have a Aerocool - X-Vision.
http://www.aerocool.us/peripheral/xvision.htm

However the above controller does not turn off the fans, which is a pain as I have a lot of fans. Can anyone recommend a can controller which only uses one bay, which is automatic, and also can turn off the fans...

I also have 3 fans on on channel

Reply to bushidowarrior
Register or log in to remove.
scout_03   02-04-2012 at 03:19:12 AM

fan one go from 50% to max then 2 to 5 from 50% to stop

Message quoted 1 times
Reply to scout_03
bushidowarrior   02-04-2012 at 03:20:55 AM

Please ignore


Message edited by bushidowarrior on 02-04-2012 at 03:22:08 AM
Reply to bushidowarrior
bushidowarrior   02-04-2012 at 03:21:42 AM

scout_03 wrote :

fan one go from 50% to max then 2 to 5 from 50% to stop




Yea... I agree. I checked... But it does not do what.... Do you have the same one???

Reply to bushidowarrior
scout_03   02-04-2012 at 03:29:08 AM

i use the link you post to see this

Reply to scout_03
bushidowarrior   02-04-2012 at 03:30:45 AM

Yea, I have two of the,,, when the temp goes higher than what has been sent. The fan does not start.... I do agree as I checked the manual... But it does not do that.....

Reply to bushidowarrior
scout_03   02-04-2012 at 03:33:18 AM

none of the sensor where bent like they show on the picture also try reset to factory setting

Reply to scout_03
bushidowarrior   02-04-2012 at 03:35:45 AM

Done all that. sensors. all good. Alarm goes off but the fans does not start... Tried both units... unless there is a special way to set it up

Reply to bushidowarrior
scout_03   02-04-2012 at 03:37:56 AM

the only way i see is the one describe in user manual

Reply to scout_03
bushidowarrior   02-04-2012 at 03:39:33 AM

I agree. However I can make it work between 50% - 100% but that is not what I need.... I have sent an email to Aerocool.... Very strange to say the least!!!!

Reply to bushidowarrior
scout_03   02-04-2012 at 03:40:47 AM

seen on the post you got 3 fans on same channel try it with one fan by channel adding also did you connect the 4 pins molex to the control


Message edited by scout_03 on 02-04-2012 at 03:42:15 AM
Reply to scout_03
bushidowarrior   02-04-2012 at 03:42:56 AM

I have only 1 fan on a channel to test.... Still the same thing...

Reply to bushidowarrior
scout_03   02-04-2012 at 03:49:25 AM

would bring back the controller and ask rma since they dont work

Reply to scout_03
bushidowarrior   02-04-2012 at 03:50:40 AM

Indeed, or it might be a manufacturing fault, thank you scout_03 for you your help

Reply to bushidowarrior
bushidowarrior   02-04-2012 at 03:52:36 AM

If you know of another system that can do the same, please let me know. Thank you :)

Reply to bushidowarrior
bushidowarrior   02-18-2012 at 03:35:41 PM

Hi, does any one know of a specific model?

Reply to bushidowarrior
Register or log in to remove.
Ask the community Add a reply
See all topics related to "Auto fan controller - turns off fans"
Tom's Hardware > Forum > Overclocking > Heatsinks & Air Cooling > [Solved] Auto fan controller - turns off fans
Go to:

There are 815 identified and unidentified users. To see the list of identified users, Click here.

Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 1.052 seconds
  • Ask the community now
  • Publish
Ad
Latest best answer
Keyboard Num Lock turns on/off during startup and shut down
By PhilFrisbie, 15 days ago:

I think you are just noticing the normal Windows behavior. . .

They won a badge
Join us in greeting them
How do I win badges?
Top experts
Become an expert The rank
Partners