Tom's Hardware > Forum > Overclocking > Water Cooling > [Solved] XSCP Raystorm 1/2id 3/4id fit ?

[Solved] XSCP Raystorm 1/2id 3/4id fit ?

Forum Overclocking : Water Cooling [Solved] XSCP Raystorm 1/2id 3/4id fit ?

Just curious if anyone knows if the bits power compression fittings will fit on a raystorm at 1/2ID and 3/4ID tube ? Also Ive been reading some people saying you should really use Rotary fittings if using 1/2"ID 3/4"OD Tubing, What is your opinions on that ?

Reply to Deeks

Best answer

This is an excellent question. The Raystorm is pretty new yet, so it might be hit or miss to find an example. Let me look around a bit.

Found:

http://martinsliquidlab.org/2011/0 [...] aystorm/3/

Per Martin:

Quote :

And for my compression fitting fans, lots of space to include 3/4″ compression fittings as I have shown in the below photo. I actually prefer barbs myself, but many people use compression fittings today and Raystorm can handle the larger sizes without problem.

Message edited by rubix_1011 on 01-30-2012 at 03:23:34 AM

------------------------------ Watercooling Info:
Tom's Hardware Watercooling Sticky
Build Log | Project: Askew
Stuff 4 Sale
Reply to rubix_1011

Best answer selected by Deeks.

------------------------------ Intel CoreI7 2600k OC 4.7ghz, Asus P8P67 EVO, 16gb Corsair Vengeance 1600mhz,
Asus Geforce 580 GTX OC 950mhz, Corsair AX 1200 PSU, Xigmatek Esylium,
Kingston HyperX 120gig SSD, Western Digital 1TB Caviar Black
Reply to Deeks