GeForce 7050M-M ECS Overclock AM2

Hi guys!

I decided to OC my old pc.It is a

Amd Athlon x64 4200+
3Gb Ddr2 667 Mhz
GeForce 7050M-M ECS
500W Psu
Onboard sound and gpu
250Gb Hdd

I tryed to increase multiplier but didnt find anything.Only thing i could change is HT that is currently set to 600mhz . This board has an nvidia chipset and i cant use AMD OverDrive. Is there anything i can do like to change voltages or increase core clock ?

Thank you .

yes you can do
use nvidia ntune, msi control centre, cputweaker, cpu fsb, clock gen, bios etc to overclock it

use these ram timings in bios
tcl 5
trcd 5
trp 5
tras 15
trc 20
trfc0 195 or 327.5
ddr2 voltage 2.20v
and memory clock at 533mhz
and then save settings and then boot to window and use ntune to hit 230 fsb

to be more precise on timings you need to post your current ram timings (use cpuz)

use prime95 (small ftt) to check stability

and use hwinfo to keep monitoring your temps gnd keep them below 60'c at full load

have you tried the settings that i have mentioned

disable these settings from bios
pci spread spectrum
sata spread spectrum
igpu spread spectrum
cpu/ltd spread spectrum
amd C&Q

use cas latency (cl) at 6 (or 7 if stable)

use memclock value at 266mhz

ht at 200mhz

for shutdown temperature either disable it or use around 65'C (if present)

use these settings and then post a pic of cpuid

i need pic of this setting 'auto detect dimm/pci clk'

well in between you can try nvidia ntune to hit 230mhz fsb (increase 1-2mhz at a time)

try those settings in bios that i have listed above, and then use ntune to overclock

what

try each ht (one by one) from bios to see if they work

or
use ntune to raise it to x5 (do it after other overclocks, i.e, after you achieve 231, because it cause me problem when i use it at x5 before overclocking)

you can try higher fsb too

New core speed 2612 MHZ
Multiplier x11
Bus speed 237.5
HT 950 Mhz
HTT 238 Mhz
HT multiplier x4
Ram 633 mhz
reference clock PCI-E 2550mhz

didnt change nothing . i tried x5 and memclock max is 250 -_-

this is strange!!!!!!!!!!

i cant help you in this issue of bad performance after overclocking

sorry

you are getting bad performance after overclocking and still want to overclock

if you still want to overclock then use those which i have stated above during 01-05-2012 at 09:31:50 AM

now there ya go